Category: 3D Printed Projects

3D Printed Project – Modifiable Tool Holder!

In this episode, we will be looking at a easy modifiable tool holder that I have placed out on Thinigiverse for you guys as there is a blank version to create what you need in say TinkerCad and one with holes so you can print and go! I have also included a set of pegboard pins too which allow you to attach this to the pegboard just by poping the pins in!

Modifiable Pegboard Tool Holder!
www.thingiverse.com/thing:2778991

Handy Tools:
USB Oscilloscope: diy3dtech.com/hantek-pc-based-usb-digital-oscilloscope/
USB Dial Indicator: diy3dtech.com/usb-dial-indicator-kit/
Vacuum Former: diy3dtech.com/vacuum-former/
Dry Film Lubricant: diy3dtech.com/dupont-teflon-non-stick-dry-film-lubricant/
Contour Gauges: diy3dtech.com/contour-gauges/
FLIR Camera: diy3dtech.com/flir-one-thermal-imaging-camera/
Digital Caliper: diy3dtech.com/digital-caliper-depth-gauge/
Power Screwdriver: diy3dtech.com/cordless-power-precision-screwdriver/
Screwdriver Repair Tool: diy3dtech.com/stepless-electric-screwdriver-repair-tool/
Air Quality Meters: diy3dtech.com/air-quality-meters-for-3d-printing/
Rotary Tool: diy3dtech.com/dc-6v-24v-mini-rotary-tool-electric-drill/
Scotch Brite Wheels: diy3dtech.com/38mm-abrasive-scotch-brite-wheels-for-dremel/

Please visit www.DIY3DTech.com for more information on this and many other projects!

Follow us on Instagram:
www.instagram.com/diy3dtech/

Subscribe to the DIY3DTech YouTube Channel:
YouTube.DIY3DTech.com

Subscribe to the DIY3DTech OpenSCAD Channel:
openscad-youtube.diy3dtech.com

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: swag.DIY3DTech.com

3D Printed Project – UpCycling Pill Bottles for Shop Storage!

In this episode, we will be be looking at a “separator” which I designed in Open-SCAD for upcycling screws in the shop using discarded pill bottles! As a Maker, I love doing upcycling projects to make use of discarded things so I had a bunch of these laying around the shop so here you are!

Pill Bottle Upcycling Separator!
www.thingiverse.com/thing:2798126

Also if your looking for a collection of professional 3D print finishing tools take a look here: diy3dtech.com/3d-print-clean-up-tools/

If you looking for a new 3d Printer and want to also help support the channel, check out these deals!
Amazing BIG Kit printer……: diy3dtech.com/gearbest-tronxy-x5s-high-precision-large-scale-3d-printer/
Original Gearbest version…: diy3dtech.com/gearbest-cr-10-super-large-3d-printer/
Best Deals on a Creality……: diy3dtech.com/creality-cr-10-best-deals/
Have you been bitten……….: diy3dtech.com/gearbest-tevo-black-widow-3d-printer-kit/
Have you seen this…………..: diy3dtech.com/gearbest-tronxy-x1-desktop-3d-printer/
Best Small Kit Deal…………..: diy3dtech.com/tevo-tarantula/
Creality CR-10 Killer………….: diy3dtech.com/gearbest-jgaurora-a5-updated-high-accuracy-3d-printer/
Better then Monoprice Mini…: diy3dtech.com/geeetech-e180-mini-3d-printer/

Please visit www.DIY3DTech.com for more information on this and many other projects!

Follow us on Instagram:
www.instagram.com/diy3dtech/

Subscribe to the DIY3DTech YouTube Channel:
YouTube.DIY3DTech.com

Subscribe to the DIY3DTech OpenSCAD Channel:
openscad-youtube.diy3dtech.com

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: swag.DIY3DTech.com

Inland 1.75mm Black PLA 3D Printer Filament - 1kg Spool (2.2 lbs)

by INLAND [INLAND]
Rank/Rating: 8275/-
Price: $16.99

3D Printed Project – Multi Purpose Pegboard Micrometer Mount!

In this episode, we will be looking at this multi-purpose micrometer (see here: amzn.to/2C5yesS) pegboard mount. As in my quest for a mid-winter shop organization program I decided to design up these nifty little mounts! So instead of just doing the same ole thing I decided to up the game with a multi-purpose design by adding a pen/pencil holder to the top and neodymium magnets (see here: amzn.to/2BhBN2n ) to the side to hold my favored metal scales (see here: amzn.to/2GXUs3X).

Multi-Purpose Micrometer Pegboard Mount!: www.thingiverse.com/thing:2786407

Affordable Micrometer / Thickness Gauge: amzn.to/2C5yesS
Neodymium Magnets: amzn.to/2BhBN2n
Metal Scales: amzn.to/2GXUs3X

Looking for a new printer and want to help support the channel then check out these links:
Amazing BIG Kit printer……: diy3dtech.com/gearbest-tronxy-x5s-high-precision-large-scale-3d-printer/
Original Gearbest version…: diy3dtech.com/gearbest-cr-10-super-large-3d-printer/
Best Deals on a Creality……: diy3dtech.com/creality-cr-10-best-deals/
Have you been bitten……….: diy3dtech.com/gearbest-tevo-black-widow-3d-printer-kit/
Have you seen this…………..: diy3dtech.com/gearbest-tronxy-x1-desktop-3d-printer/
Best Small Kit Deal…………..: diy3dtech.com/tevo-tarantula/
Creality CR-10 Killer………….: diy3dtech.com/gearbest-jgaurora-a5-updated-high-accuracy-3d-printer/
Better then Monoprice Mini: diy3dtech.com/geeetech-e180-mini-3d-printer/

Please visit www.DIY3DTech.com for more information on this and many other projects!

Follow us on Instagram:
www.instagram.com/diy3dtech/

Subscribe to the DIY3DTech YouTube Channel:
YouTube.DIY3DTech.com

Subscribe to the DIY3DTech OpenSCAD Channel:
openscad-youtube.diy3dtech.com

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: swag.DIY3DTech.com

3D Printed Project – BONUS Modifiable Desktop Tool Holder!

In this episode, we will be looking at what I refer to as an S-Shaped desktop stand which is easily modifiable in programs such as TinkerCad and the like. In addition, we also included a version with 7mm holes to provide an example of ways to modify and even print out!

S-Shaped Modifiable Desktop Tool Stand!: www.thingiverse.com/thing:2781296

If your looking for a new printer, check these out as it helps me to keep creating great new designs to post on thingiverse!

Amazing BIG Kit printer……: diy3dtech.com/gearbest-tronxy-x5s-high-precision-large-scale-3d-printer/
Original Gearbest version…: diy3dtech.com/gearbest-cr-10-super-large-3d-printer/
Best Deals on a Creality……: diy3dtech.com/creality-cr-10-best-deals/
Have you been bitten……….: diy3dtech.com/gearbest-tevo-black-widow-3d-printer-kit/
Have you seen this…………..: diy3dtech.com/gearbest-tronxy-x1-desktop-3d-printer/
Best Small Kit Deal…………..: diy3dtech.com/tevo-tarantula/
Creality CR-10 Killer………….: diy3dtech.com/gearbest-jgaurora-a5-updated-high-accuracy-3d-printer/
Better then Monoprice Mini: diy3dtech.com/geeetech-e180-mini-3d-printer/

Please visit www.DIY3DTech.com for more information on this and many other projects!

Follow us on Instagram:
www.instagram.com/diy3dtech/

Subscribe to the DIY3DTech YouTube Channel:
YouTube.DIY3DTech.com

Subscribe to the DIY3DTech OpenSCAD Channel:
openscad-youtube.diy3dtech.com

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: swag.DIY3DTech.com

3D Print Air Quality – PLA verses ABS and the Results are In!

In this episode, we will be testing everyone’s favorite filament yes PLA! Again we will use the same STL for the testings (as we will for all test) that was used in the ABS test run them side by side as well as talk about a couple interesting comments that I received from prior videos on the subject!

Air Quality Playlist: goo.gl/CNbrJQ
Dr. Dave Post: diy3dtech.com/dr-daves-post-on-resin-based-printers/

If your interested in getting one of these meters, here is the link where you can find several options: diy3dtech.com/air-quality-meters-for-3d-printing/

Other related videos:
Shop Talk – 3D Printing and Air Quality: youtu.be/pgWss4X0mdE
Shop Talk – Unboxing an Air Quality Meter for 3D Printer Testing: youtu.be/qATY-v2Q6ao
ABS -vs- HIPS: youtu.be/vc-0yeWowYk

Couple points worth note:

[1] Just because you don’t “smell” something doesn’t mean there aren’t particles in the air.
[2] Measurements in the video are for formaldehyde registering substances and TVOC (Total Volatile Organic Compound en.wikipedia.org/wiki/Volatile_organic_compound).

This means there could be other “bad” things in the air which we are not measuring. So this is why one of the larger data points we will focus on are PM2.5 counts. So you might ask why we are so concerned about this? Well, Since they are so small and light, PM2.5 particles tend to stay longer in the air than their heavier siblings the PM10 particles. This increases the chances of humans and animals inhaling them and due to their small size, particles smaller than 2.5 micrometers are able to bypass the nose and throat and penetrate deep into the lungs with some may even enter the circulatory system.

There have been studies which have found a close link between exposure to fine particles and premature death from heart and lung disease. Fine particles are also known to trigger or worsen chronic disease such as asthma, heart attack, bronchitis and other respiratory problems as well as a Journal of the American Medical Association (www.ncbi.nlm.nih.gov/pubmed/11879110) paper which suggests that “long-term exposure to PM2.5 may lead to plaque deposits in arteries, causing vascular inflammation and a hardening of the arteries which can eventually lead to heart attack and stroke. Scientists in the study estimated that for every 10 micrograms per cubic meter (μg/m3) increase in fine particulate air pollution, there is an associated 4%, 6% and 8% increased risk of all-cause, cardiopulmonary and lung cancer mortality, respectively”

Now the goal this project is not to promote fear mongering, however information as homes are not factory’s and 3D printing introduces pollutants which many homes in their design where not meant to deal with.

Reference for citation: blissair.com/what-is-pm-2-5.htm

Please visit www.DIY3DTech.com for more information on this and many other projects!

Amazing BIG Kit printer……: diy3dtech.com/gearbest-tronxy-x5s-high-precision-large-scale-3d-printer/
Original Gearbest version…: diy3dtech.com/gearbest-cr-10-super-large-3d-printer/
Best Deals on a Creality……: diy3dtech.com/creality-cr-10-best-deals/
Have you been bitten……….: diy3dtech.com/gearbest-tevo-black-widow-3d-printer-kit/
Have you seen this…………..: diy3dtech.com/gearbest-tronxy-x1-desktop-3d-printer/
Best Small Kit Deal…………..: diy3dtech.com/tevo-tarantula/
Creality CR-10 Killer………….: diy3dtech.com/gearbest-jgaurora-a5-updated-high-accuracy-3d-printer/
Better then Monoprice Mini: diy3dtech.com/geeetech-e180-mini-3d-printer/

Please visit www.DIY3DTech.com for more information on this and many other projects!

Follow us on Instagram:
www.instagram.com/diy3dtech/

Subscribe to the DIY3DTech YouTube Channel:
YouTube.DIY3DTech.com

Subscribe to the DIY3DTech OpenSCAD Channel:
openscad-youtube.diy3dtech.com

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: swag.DIY3DTech.com

3D Printed Project – Universal Base Designer on Thingiverse!

In this episode, we will be taking a look at a Universal Base Creator which I whipped up and and made into a Thinigverse Customizer! As I needed a base for my new laser cooling pump and printed it in TPU to absorb the viberation and realized I was doing this all of the time so creating a customize was an easy route to solving this problem and figured I would share this with community!

Here it is on Thinigverse: www.thingiverse.com/thing:2670250

If your interested in the Open-SCAD code, check this page out for more details: openscad.diy3dtech.com/open-scad-universal-base-designer/

Recommended Printers:
Best starter printer: diy3dtech.com/monoprice-select-mini/
Best Large Scale Kit: diy3dtech.com/gearbest-tronxy-x5s-high-precision-large-scale-3d-printer/
Orignal Creality CR-10: diy3dtech.com/gearbest-cr-10-super-large-3d-printer/
Deals on Cerality CR-10: diy3dtech.com/creality-cr-10-best-deals/
Large Scale Alternative: diy3dtech.com/gearbest-tevo-black-widow-3d-printer-kit/
Small scale alternative: diy3dtech.com/gearbest-tronxy-x1-desktop-3d-printer/
Best starter kit and commuity: diy3dtech.com/tevo-tarantula/
Affordable Resin Printer: diy3dtech.com/wanhao-duplicator-7-v1-4-uv-dlp-resin-3d-printer/

Please visit www.DIY3DTech.com for more information on this and many other projects!

Follow us on Instagram:
www.instagram.com/diy3dtech/

Subscribe to the DIY3DTech YouTube Channel:
YouTube.DIY3DTech.com

Subscribe to the DIY3DTech OpenSCAD Channel:
openscad-youtube.diy3dtech.com

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: swag.DIY3DTech.com

3D Printed Projects – Thingiverse Customizer for precision 608zz Bearing Based Spool Holder!

As in this episode, we will be looking at a Thingiverse Customizer for precision 608zz Bearing Based Spool Holder for the Wanhao as I wanted to get the flow of filament butter smooth as to not have any (or at least limited) drag for Thingiverse Customizer for precision prints

Please visit www.DIY3DTech.com for more information on this and many other projects!

Check out our new photography and videography channel!
youtube.on-photography.pictures

30 peice 608zz bearings: amzn.to/2zZCoWz

Precision 608zz Customizable Variable Sized Spool Holder!
www.thingiverse.com/thing:2619253

Best Large Scale Printer kit: diy3dtech.com/gearbest-tronxy-x5s-high-precision-large-scale-3d-printer/

Want big and easy: diy3dtech.com/creality-cr-10-best-deals/

Follow us on Instagram:
www.instagram.com/diy3dtech/

Subscribe to the DIY3DTech YouTube Channel:
YouTube.DIY3DTech.com

Subscribe to the DIY3DTech OpenSCAD Channel:
openscad-youtube.diy3dtech.com

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: swag.DIY3DTech.com

3D Printed Projects – Designing a Pegboard Holder for Power Driver!

Please visit ift.tt/1PJb2UK for more information on this and many other projects! As in this episode, we will be designing a holder (will work with pegboard or simply screws too) for the HAMMERHEAD 4V Lithium Rechargeable Screwdriver which I pick up the other day. This is a niffty power driver (see more here: amzn.to/2wFAmGF) however its odd configuration made it hard to store so we solved that problem with a 3D Printer and some design skills which we will share with you!

HAMMERHEAD 4V Lithium Rechargeable Screwdriver with Patented Circuit Sensor Technology and 9-Piece Bit Kit – B01N0YV423
amzn.to/2gJQV0p
amzn.to/2wFAmGF

Also here are several hook options to attach to your pegboard:
amzn.to/2vMmOZM
amzn.to/2vLYirC
amzn.to/2i9VpOf
amzn.to/2i7YSg0

Follow us on Instagram:
ift.tt/2jEZ5GW

Subscribe to the DIY3DTech YouTube Channel:
ift.tt/1VC4ZnC

Subscribe to the DIY3DTech OpenSCAD Channel:
ift.tt/2dwKTNa

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: ift.tt/1XkkoIg

3D Printed Projects – 3D Printed Arduino Prototyping Jig!

Please visit ift.tt/1PJb2UK for more information on this and many other projects! With fall in the air, the urge to leave the beach and start working on electronics is starting to itch so to scratch it by developing an Arduino Prototyping Jig. Now I had already created a re-mix as a starter, then got thinking, what about the Nano and SainSmart relays? What about also expanding it from 20×20 maker rail to 20×40 for more stability so that is what I did! As my inspiration for this design came while sitting at my workbench as I faced the project from a “forward” angle and not top down. This made it uncomfortable to work with as all the pins as they were hard to see so figured why not tilt everything on a 30 degree angle so its easy to see? Well here we are and will keep adding to the collection so check back on a regular basis!

Maker Rail:
ift.tt/2wGUzzo

M3 Nut and Bolt Section:
ift.tt/2xnGVOD

Arduino Uno Boards:
ift.tt/2wGUA6q

SainSmart Rely Boards:
ift.tt/2xnuIJR

Arduino Nano Boards
ift.tt/2wGUBau

Arduino Nano Screw Terminal Shields:
ift.tt/2xnxxKL

Major Favor: if you make one of these please post a MAKE and share it with the community 🙂

Follow us on Instagram:
ift.tt/2jEZ5GW

Subscribe to the DIY3DTech YouTube Channel:
ift.tt/1VC4ZnC

Subscribe to the DIY3DTech OpenSCAD Channel:
ift.tt/2dwKTNa

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: ift.tt/1XkkoIg