Category: 3D Printed Projects

3D Printed Project – An Arduino Uno Prototyping Base!

Please visit ift.tt/1PJb2UK for more information on this and many other projects! As in this episode, we will be 3d printing an Arduino prototyping base from Thingiverse!

Follow us on Instagram:
ift.tt/2jEZ5GW

Subscribe to the DIY3DTech YouTube Channel:
ift.tt/1VC4ZnC

Subscribe to the DIY3DTech OpenSCAD Channel:
ift.tt/2dwKTNa

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: ift.tt/1XkkoIg

3D Printed Project – 3D Printing for a Solar Eclipse!

Please visit ift.tt/1PJb2UK for more information on this and many other projects! As in this episode, we will be showing some design tricks in Tinkercad as we design, print and install an adapter ring for a solar filter as we prepare for the upcoming solar eclipse!

Also, ver important never look at the sun even during a solar eclipse as it can irreparable damage!

Follow us on Instagram:
ift.tt/2jEZ5GW

Subscribe to the DIY3DTech YouTube Channel:
ift.tt/1VC4ZnC

Subscribe to the DIY3DTech OpenSCAD Channel:
ift.tt/2dwKTNa

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: ift.tt/1XkkoIg

3D Printed Project – CNC Alignment Collar for Spindle!

Please visit ift.tt/1PJb2UK for more information on this and many other projects! As in this episode, we will be taking a look at the 3D printable alignment collar we created the 800 watt water cooled spindle on the 3040 CNC. We created this in open Open SCAD and have also created a Custmizer version of this on Thingiverse (here: ift.tt/2vMPnZc ) so you can match it to your needs!

Related Open-SCAD video: youtu.be/3_daa_Mt8HE as well as the code if your interested: ift.tt/2vuoQgZ

We also recommend this dial indicator and USB cable below to feed the measurements directly into your computer! In addition we will be publishing a video soon on how to use this to set your GRBL numbers as well how to upgrade to GRBL 1.1 so stay tuned!

Clockwise Tools DTCR-01 RS232 (USB) Digital Indicator Data Transfer Cable
amzn.to/2tJwKSx

Clockwise Tools DIGR-0105 Electronic Digital Indicator Gage Gauge Inch/Metric Conversion 0-1 Inch/25.4 mm with Back Lug Auto Off Featured Measuring Tool:
amzn.to/2udgHgh

Follow us on Instagram:
ift.tt/2jEZ5GW

Subscribe to the DIY3DTech YouTube Channel:
ift.tt/1VC4ZnC

Subscribe to the DIY3DTech OpenSCAD Channel:
ift.tt/2dwKTNa

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: ift.tt/1XkkoIg

3D Printed Project – Pegboard Remix Challenge and Print!

Please visit ift.tt/1PJb2UK for more information on this and many other projects! As in this episode, we will be showing you how to a quick remix! I was called out by viewer to do a pegboard remix of one of his redesigns, so that what we did!

Modified Pegboard Caliper Holder!
ift.tt/2fmXhSL

Original Design (Digital Caliper Western Pro Holder)
ift.tt/2hDBzdZ

Hooks to hang holder with:
amzn.to/2ugZnoR

Calipers:
amzn.to/2w2X4rt

Follow us on Instagram:
ift.tt/2jEZ5GW

Subscribe to the DIY3DTech YouTube Channel:
ift.tt/1VC4ZnC

Subscribe to the DIY3DTech OpenSCAD Channel:
ift.tt/2dwKTNa

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: ift.tt/1XkkoIg

3D Printed Project – Coping the Design Challenges of a Project!

Please visit ift.tt/1PJb2UK for more information on this and many other projects! As in this episode, we will be looking at pegboard based air can holder which I designed and posted to Thiniverse. As this is a bit of vlog format to discuss some of the challenges of the process (which consumed a lot of filament and printer time) as how a design can affect the print-a-ability of a model as well as sharing this new design with you guys!

Pegboard Air (or any 66.5mm) Can Holder!
ift.tt/2vdzvfH

Pegboard and Holes Utility!
ift.tt/2vw79A4

Follow us on Instagram:
ift.tt/2jEZ5GW

Subscribe to the DIY3DTech YouTube Channel:
ift.tt/1VC4ZnC

Subscribe to the DIY3DTech OpenSCAD Channel:
ift.tt/2dwKTNa

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: ift.tt/1XkkoIg

3D Printed Project – Creating the Drawer Caddy a CHEP Knockoff!

Please visit ift.tt/1PJb2UK for more information on this and many other projects! So there I was late one night, I couldn’t sleep so I was watching Infomercials and got bored of them, so went over and was watching Chuck Hellebuyck’s channel (CHEP) and he did this thing with a tray that screwed into the front of his workbench and I said “self” that’s cool but it requires commitment (i.e. to screw it in) so I said self “there has to be a better way” and in reading down the comments a viewer wrote Chuck saying “Neodymium magnets would be cool” and Chuck said go for it, its on Tinkercad! Well what was Chuck going to say as he already screwed his in 🙂 right? However it hit me right there in the wee hours of the morning! As I was just grocery shopping with the wife the day before and I always get a 6 pack of Coke Zero and hang it on the side of the cart so why not hang the drawer caddy on the front of the drawer? Bingo, up I sprang out of bed and didn’t call Jake from State Farm but logged into Thinkercad and went feverishly to work on the design of a drawer caddy and as Emeril Lagasse would say BAM! Here it is the Drawer Caddy, the ultimate in exo-drawer storage technology and you can have it in your home not tomorrow but with any 200mm x 200mm 3D print today! Yes that’s right TODAY! Wait it gets even better yet if you can believe it, just print it today and you can print a second one (or two) tomorrow for free (well the cost of the filament and such is yours of course but its better than paying extra shipping and handling right? the lawyers made me add that).

Wait! As a special added bonus because your significant other most likely won’t let you put that 3D printed stuff in the kitchen. We have a solution for you as there are many finishing options available (at an additional charge of course) should again you (or significant other) not like the 3D printed look (which my wife doesn’t) as you can use a stone spray paint such this (amzn.to/2ue7gyw) which my wife even approves of or a lighter textured version such as this (amzn.to/2uewehx) to cover those nasty layer lines. As YES, with this can magic they will think you spent a fortune on them but it will be our little secret (I won’t tell if you don’t :-)! So what are you waiting for Christmas (by the way these make great stocking suffers too!). So don’t wait, stop reading this and start printing today as you don’t want your neighbors (you know the Jones) to have one before you! Don’t Delay, download now before they are all gone!

P.S. If you make one, please post a make here on Thingverse to show us your use of this new exo-drawer storage technology in action and who knows we might even pick you yes YOU for our next infomercial! (if we did infomercials)

Drawer Caddy!
ift.tt/2ubXhvw

Workbench Catch Tray – 3D Printed (Chuck’s Video):

Follow us on Instagram:
ift.tt/2jEZ5GW

Subscribe to the DIY3DTech YouTube Channel:
ift.tt/1VC4ZnC

Subscribe to the DIY3DTech OpenSCAD Channel:
ift.tt/2dwKTNa

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: ift.tt/1XkkoIg

HICTOP Creality CR-10 3D Printer Prusa I3 DIY Kit Aluminum Large Print Size 300x300x400mm

by HICTOP [HIC Technology]
Rank/Rating: 7993/-
Price: $439.00

3D Printed Project – 3D Printed Plastic Clean Up Tool!

Please visit ift.tt/1PJb2UK for more information on this and many other projects! As in this episode, we will be showing you how to make your own plastic clean up tool from 1/8th (3mm) CNC bits to speed along your 3D printing working and improve the looks of your finial product on the cheap!

Mixed Bit Package:
amzn.to/2o7HJ5G

Follow us on Instagram:
ift.tt/2jEZ5GW

Subscribe to the DIY3DTech YouTube Channel:
ift.tt/1VC4ZnC

Subscribe to the DIY3DTech OpenSCAD Channel:
ift.tt/2dwKTNa

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: ift.tt/1XkkoIg

SHAVIV 90060 MANGO IIB + B10 + B20

by SHAVIV [VARGUS]
Rank/Rating: 169805/-
Price: $12.85

 

3D Printed Project – Prototyping Tips!

Please visit ift.tt/1PJb2UK for more information on this and many other projects! As in this episode, we will be taking a looking at couple a prototyping tips that I use when trying to work a new design as just sometimes its the good, bad and more often the ugly however figured I would you me working out a problem and some short cuts I have found!

Follow us on Instagram:
ift.tt/2jEZ5GW

Subscribe to the DIY3DTech YouTube Channel:
ift.tt/1VC4ZnC

Subscribe to the DIY3DTech OpenSCAD Channel:
ift.tt/2dwKTNa

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: ift.tt/1XkkoIg

3D Printed Project – Atom Smasher!

Please visit ift.tt/1PJb2UK for more information on this and many other projects! As in this episode, we will be building a 3D printed atom smasher!

Hey, whats more fun than smashing things right? Well why not atoms! Okay, I might be pushing things here but this project is both fun and a desktop novelty even if it doesn’t cause CERN sleepless nights. The idea here is based on an updated solid state Van de Graaff (ift.tt/2aF2b8D) design using a high voltage ionizer which I got from eBay and 3D printed like the ones used in the Cockcroft-Walton accelerators (see here: ift.tt/2pYqLcF) used in the early days of atom smashing before the cyclotron became king of the hill! Now even though this is only powered by 5volts (input) the output voltage will shock you so be forewarned! So build this at your own risk, however it makes a great desktop novelty as people will be drawn to touch not expecting such a shocking experience!

Build Parts:
While the body can be PLA or ABS you will need a conductive filament (amzn.to/2nknK1v) for the torus and high voltage ionizer (goo.gl/68id9G) along with USB cable extender (amzn.to/2of17A8)

Follow us on Instagram:
ift.tt/2jEZ5GW

Subscribe to the DIY3DTech YouTube Channel:
ift.tt/1VC4ZnC

Subscribe to the DIY3DTech OpenSCAD Channel:
ift.tt/2dwKTNa

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: ift.tt/1XkkoIg

3D Printed Projects – Working with Proto Pasta Conductive Filament!

Please visit ift.tt/1PJb2UK for more information on this and many other projects! As in this episode, we will be

Follow us on Instagram:
ift.tt/2jEZ5GW

Subscribe to the DIY3DTech YouTube Channel:
ift.tt/1VC4ZnC

Subscribe to the DIY3DTech OpenSCAD Channel:
ift.tt/2dwKTNa

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: ift.tt/1XkkoIg