Category: CNC Projects

3040 CNC – Success Cutting a Camera Filter!

In this episode, we will be cutting a Near InfraRed (NIR) filter from standard 52mm camera setup for my DJI Mavic Pro Drone! The last time the filter won, yet this time I am gear up for the win! As I am going to use a 1.7mm Diamond Bur bit cutting at 3mm/sec (instead of 20 mm/sec) and a plunge rate of 0.2mm instead of 0,5mm and we found success. Now there was some slight scalloping at the edge, and I think if I would have used plunge of 0.1 this would have improved. Yet I did account for this in the design as I only need around 16mm clear and I cut to 19mm so it should work!

If your looking for 3040 CNC like this, check out the running deals at: diy3dtech.com/purchase-3040-cnc-router/ as these are great machines!

Please visit www.DIY3DTech.com for more information on this and many other projects!

Follow us on Instagram:
www.instagram.com/diy3dtech/

Subscribe to the DIY3DTech YouTube Channel:
YouTube.DIY3DTech.com

Subscribe to the DIY3DTech OpenSCAD Channel:
openscad-youtube.diy3dtech.com

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: swag.DIY3DTech.com

Desktop CNC – First Cuts and Thoughts!


Please visit ift.tt/1PJb2UK for more information on this and many other projects! As in this episode, we will be making the first cuts with the new Desktop CNC we built and I will be sharing my thought on this unique little device!

Follow us on Instagram:
ift.tt/2jEZ5GW

Subscribe to the DIY3DTech YouTube Channel:
ift.tt/1VC4ZnC

Subscribe to the DIY3DTech OpenSCAD Channel:
ift.tt/2dwKTNa

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: ift.tt/1XkkoIg

CNC Projects – Cutting a Coin to Create Coin Art!

 

Please visit www.DIY3DTech.com for more information on this and many other projects! As in this episode we will be “cutting” a coin on the CNC to create some unique coin art or at try to! However please note, if you want to try this my machine is one the larger size for such small cuts and the spindle again has quite a bit of run-out so this is more an experiment than anything else so let’s see how turns out!
Subscribe to the DIY3DTech YouTube Channel:
YouTube.DIY3DTech.com

Subscribe to the DIY3DTech OpenSCAD Channel:
openscad-youtube.diy3dtech.com

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: swag.DIY3DTech.com

CNC Projects – Engraving a Coin for Coin Art!

 

Please visit www.DIY3DTech.com for more information on this and many other projects! As in this episode we will be putting the self-centering chucks we designed in TinkerCad to good use as we engrave a coin on the CNC! Seems there is a quite a bit of interest in this so might do a couple episodes on this topic. If you have a home based or small business where your interested inusing 3D Printing, CNC or Lasers please let me know as I would like to hear from you and if you have any questions, feel to ask them!
Subscribe to the DIY3DTech YouTube Channel:
YouTube.DIY3DTech.com

Subscribe to the DIY3DTech OpenSCAD Channel:
openscad-youtube.diy3dtech.com

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: swag.DIY3DTech.com

CNC Project – Using a VBit to Cut ABS and Polystyrene Plastic!

Please visit www.DIY3DTech.com for more information on this and many other projects! As in this episode we will be taking a look at using a single flute V-Bit for cutting soft plastic materials such as ABS and Polystyrene which tend to melt when cut with multi-flute bits.

V-Bits Used in this Video:
goo.gl/QDtNqN

Subscribe to the DIY3DTech YouTube Channel:
YouTube.DIY3DTech.com

Subscribe to the DIY3DTech OpenSCAD Channel:
openscad-youtube.diy3dtech.com

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: swag.DIY3DTech.com

CNC Project – Building Cyclone Dust Collector Part 4!

Please visit www.DIY3DTech.com for more information on this and many other projects! As in this episode we will be finishing up the dust collector project as we build a base as well as an additional flange for the top of the bucket to improve the stability of the cyclone.
Cyclone Dust Collector:
goo.gl/wO3AO5

Subscribe to our Open-SCAD YouTube Channel:
OpenSCAD-YouTube.DIY3DTech.com

Subscribe to the DIY3DTech YouTube Channel:
YouTube.DIY3DTech.com

3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc):
swag.DIY3DTech.com

TTTK Cyclone DIY Dust Collector

by - [Nantong Suning]
Rank/Rating: 1067322/-
Price: -

CNC Project – Building Cyclone Dust Collector Part 3!

Please visit www.DIY3DTech.com for more information on this and many other projects! As in this episode we will be showing you how we designed and printed hose adapters for the cyclone.
Cyclone Dust Collector:
goo.gl/wO3AO5

Subscribe to our Open-SCAD YouTube Channel:
OpenSCAD-YouTube.DIY3DTech.com

Subscribe to the DIY3DTech YouTube Channel:
YouTube.DIY3DTech.com

3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc):
swag.DIY3DTech.com

TTTK Cyclone DIY Dust Collector

by - [Nantong Suning]
Rank/Rating: 1067322/-
Price: -

CNC Project – Building Cyclone Dust Collector Part 2!

Please visit www.DIY3DTech.com for more information on this and many other projects! As in this episode we will be in part we do some more work on the dust collection system.

Cyclone Dust Collector:
goo.gl/wO3AO5

Subscribe to the DIY3DTech YouTube Channel:
YouTube.DIY3DTech.com

3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc):
swag.DIY3DTech.com

CNC Project – Building Cyclone Dust Collector Part 1!

Please visit www.DIY3DTech.com for more information on this and many other projects! As in this episode we will be building a dust collector for the CNC (Probotix Fireball v90) which should work for about any smaller machine out there. However this will be about more that just building a common dust collection system as I am going to share with you the idea of using 3D Printing, Laser cutting and CNC machining all together to make something and in this case its a dust collection systems so we can build yet more things!

Cyclone Dust Collector:
goo.gl/wO3AO5

Subscribe to the DIY3DTech YouTube Channel:
YouTube.DIY3DTech.com

3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc):
swag.DIY3DTech.com

TTTK Cyclone DIY Dust Collector

by - [Nantong Suning]
Rank/Rating: 1067322/-
Price: -

CNC Projects – Building the First CNC Routed Clocket!

Please visit www.DIY3DTech.com for more information on this and many other projects!  As in this episode we will be making a Clocket, what is a Clocket you ask?  Well, grab a coffee, pull up a chair and take a look!

Also visit us at:
www.diy3dtech.com

Subscribe to the DIY3DTech YouTube Channel:
YouTube.DIY3DTech.com

3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc):
swag.DIY3DTech.com

2-1/2" White Clock Insert

by Klockit [Klockit]
Rank/Rating: 310804/-
Price: $17.52