Category: Projects

3D Print Air Quality – Nylon vs ABS and the RESULTS are!

In this episode, we will be taking a look at Nylon (bridge nylon see more here: amzn.to/2BUaM5v) as we start to wrap up our air quality series! Also as I mention in the video I will be doing a wrap up and finial thoughts, however by popular demand I will be doing ASA plastic (its on order) so look for that in the future as well as I might revisit colors too and many folks wrote me about that too!

Air Quality Playlist: goo.gl/CNbrJQ
Dr. Dave Post: diy3dtech.com/dr-daves-post-on-resin-based-printers/

If your interested in getting one of these meters, here is the link where you can find several options: diy3dtech.com/air-quality-meters-for-3d-printing/

Other related videos:
Shop Talk – 3D Printing and Air Quality: youtu.be/pgWss4X0mdE
Shop Talk – Unboxing an Air Quality Meter for 3D Printer Testing: youtu.be/qATY-v2Q6ao
ABS -vs- HIPS: youtu.be/vc-0yeWowYk

Couple points worth note:

[1] Just because you don’t “smell” something doesn’t mean there aren’t particles in the air.
[2] Measurements in the video are for formaldehyde registering substances and TVOC (Total Volatile Organic Compound en.wikipedia.org/wiki/Volatile_organic_compound).

This means there could be other “bad” things in the air which we are not measuring. So this is why one of the larger data points we will focus on are PM2.5 counts. So you might ask why we are so concerned about this? Well, Since they are so small and light, PM2.5 particles tend to stay longer in the air than their heavier siblings the PM10 particles. This increases the chances of humans and animals inhaling them and due to their small size, particles smaller than 2.5 micrometers are able to bypass the nose and throat and penetrate deep into the lungs with some may even enter the circulatory system.

There have been studies which have found a close link between exposure to fine particles and premature death from heart and lung disease. Fine particles are also known to trigger or worsen chronic disease such as asthma, heart attack, bronchitis and other respiratory problems as well as a Journal of the American Medical Association (www.ncbi.nlm.nih.gov/pubmed/11879110) paper which suggests that “long-term exposure to PM2.5 may lead to plaque deposits in arteries, causing vascular inflammation and a hardening of the arteries which can eventually lead to heart attack and stroke. Scientists in the study estimated that for every 10 micrograms per cubic meter (μg/m3) increase in fine particulate air pollution, there is an associated 4%, 6% and 8% increased risk of all-cause, cardiopulmonary and lung cancer mortality, respectively”

Now the goal this project is not to promote fear mongering, however information as homes are not factory’s and 3D printing introduces pollutants which many homes in their design where not meant to deal with.

Reference for citation: blissair.com/what-is-pm-2-5.htm

Please visit www.DIY3DTech.com for more information on this and many other projects!

Amazing BIG Kit printer……: diy3dtech.com/gearbest-tronxy-x5s-high-precision-large-scale-3d-printer/
Original Gearbest version…: diy3dtech.com/gearbest-cr-10-super-large-3d-printer/
Best Deals on a Creality……: diy3dtech.com/creality-cr-10-best-deals/
Have you been bitten……….: diy3dtech.com/gearbest-tevo-black-widow-3d-printer-kit/
Have you seen this…………..: diy3dtech.com/gearbest-tronxy-x1-desktop-3d-printer/
Best Small Kit Deal…………..: diy3dtech.com/tevo-tarantula/
Creality CR-10 Killer………….: diy3dtech.com/gearbest-jgaurora-a5-updated-high-accuracy-3d-printer/
Better then Monoprice Mini: diy3dtech.com/geeetech-e180-mini-3d-printer/

Please visit www.DIY3DTech.com for more information on this and many other projects!

Follow us on Instagram:
www.instagram.com/diy3dtech/

Subscribe to the DIY3DTech YouTube Channel:
YouTube.DIY3DTech.com

Subscribe to the DIY3DTech OpenSCAD Channel:
openscad-youtube.diy3dtech.com

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: swag.DIY3DTech.com

Cura – Experimenting with Adaptive Layering!

In this episode, we downloaded and installed the Cura Beta with Adaptive Layering! This is a new addition for Cura and it is still “experimental” so guess what we are going to experiment with it! So I am going to show you how to activate it, and what how each of the settings affect your print!

Download Cura Beta Here: ultimaker.com/en/blog/52479-ultimaker-cura-32-beta-now-available

If you looking for a new 3d Printer and want to also help support the channel, check out these deals!

Amazing BIG Kit printer……: diy3dtech.com/gearbest-tronxy-x5s-high-precision-large-scale-3d-printer/
Original Gearbest version…: diy3dtech.com/gearbest-cr-10-super-large-3d-printer/
Best Deals on a Creality……: diy3dtech.com/creality-cr-10-best-deals/
Have you been bitten……….: diy3dtech.com/gearbest-tevo-black-widow-3d-printer-kit/
Have you seen this…………..: diy3dtech.com/gearbest-tronxy-x1-desktop-3d-printer/
Best Small Kit Deal…………..: diy3dtech.com/tevo-tarantula/
Creality CR-10 Killer………….: diy3dtech.com/gearbest-jgaurora-a5-updated-high-accuracy-3d-printer/
Better then Monoprice Mini…: diy3dtech.com/geeetech-e180-mini-3d-printer/

Also if your looking for a collection of professional 3D print finishing tools take a look here: diy3dtech.com/3d-print-clean-up-tools/

Please visit www.DIY3DTech.com for more information on this and many other projects!

Follow us on Instagram:
www.instagram.com/diy3dtech/

Subscribe to the DIY3DTech YouTube Channel:
YouTube.DIY3DTech.com

Subscribe to the DIY3DTech OpenSCAD Channel:
openscad-youtube.diy3dtech.com

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: swag.DIY3DTech.com

GearBest GeeeTech E180 – Designing and Printing an X-acto Knife Stand!

In this bonus episode, we will be creating an X-acto Knife stand from a generic base which we whipped up in Open-SCAD and printed out in clear PLA on the GearBest GeeeTech E180 mini printer. Now I got to say, I am impressed as while this appears simple it is not with its domed top and massive kruling makes this a very challenging print!

Also if you make something with this (generic base STL model is below), please share an let me what yo made 🙂

X-acto Knife Stand!
www.thingiverse.com/thing:2768646

Generic Base!
www.thingiverse.com/thing:2770737

Please visit www.DIY3DTech.com for more information on this and many other projects!

Follow us on Instagram:
www.instagram.com/diy3dtech/

Subscribe to the DIY3DTech YouTube Channel:
YouTube.DIY3DTech.com

Subscribe to the DIY3DTech OpenSCAD Channel:
openscad-youtube.diy3dtech.com

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: swag.DIY3DTech.com

GearBest GeeeTech E180 – The MonoPrice Mini Killer

In this episode, we will be unboxing the GeeeTech (that’s right with three “e”’s) from GearBest as when picked the little guy to review, I was looking for a MonoPrice Mini killer! As the MonoPrice Mini like the Cerality CR-10 (of the large scale) has been the reigning king of the small scale printers. However as I have said with the Creality CR-10, the reaign of all kings mst come to an end sooner then later and the MonoPrice Mini has been a great printer, is there better now? Well we are going to find as we start messing around with this little guy and so far I have been impressed, but need a little time under my belt to say for sure.

Please visit www.DIY3DTech.com for more information on this and many other projects!

Follow us on Instagram:
www.instagram.com/diy3dtech/

Subscribe to the DIY3DTech YouTube Channel:
YouTube.DIY3DTech.com

Subscribe to the DIY3DTech OpenSCAD Channel:
openscad-youtube.diy3dtech.com

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: swag.DIY3DTech.com

Inland 1.75mm Black PLA 3D Printer Filament - 1kg Spool (2.2 lbs)

by Inland [Inland]
Rank/Rating: 188/-
Price: $12.99

K40 eBay Chinese CO2 Laser Cutter & Engraver – 3D Printed Exhaust Vent Adapter!

Please visit www.DIY3DTech.com for more information on this and many other projects! As in this episode, we will be 3D printing an an adapater and collar for the K40 eBay Chinese CO2 Laser Cutter & Engraver. As the main cone is printed in TPU (here: amzn.to/2gS9Hzk) while the collar in ABS (here: amzn.to/2zWToZA ). Also you can find the additional parts below:

3″ Vinyl Hose for vent: amzn.to/2zWRUP0
Exhaust Booster Fan: amzn.to/2hvEvqD

Follow us on Instagram:
www.instagram.com/diy3dtech/

Subscribe to the DIY3DTech YouTube Channel:
YouTube.DIY3DTech.com

Subscribe to the DIY3DTech OpenSCAD Channel:
openscad-youtube.diy3dtech.com

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: swag.DIY3DTech.com

My First 3D Printer – Bed Leveling and How to Get Plastic to Stick!

In this episode, we will be looking at the first thing you need to do before you print and that is leveling [tramming] your bed and how in the heck do you get that plastic to stick! As one of the first things you need to learn in 3D printing is the old adage that “the first is the first layer is the most important layer” of any print because if it doesn’t stick than you entire print is shot! So grab that hot chocolate as we share the basic with you in this short and to the point video!

Recommended Printers:
Best starter printer: diy3dtech.com/monoprice-select-mini/
Best Large Scale Kit: diy3dtech.com/gearbest-tronxy-x5s-high-precision-large-scale-3d-printer/
Orignal Creality CR-10: diy3dtech.com/gearbest-cr-10-super-large-3d-printer/
Deals on Cerality CR-10: diy3dtech.com/creality-cr-10-best-deals/
Large Scale Alternative: diy3dtech.com/gearbest-tevo-black-widow-3d-printer-kit/
Small scale alternative: diy3dtech.com/gearbest-tronxy-x1-desktop-3d-printer/
Best starter kit and commuity: diy3dtech.com/tevo-tarantula/
Affordable Resin Printer: diy3dtech.com/wanhao-duplicator-7-v1-4-uv-dlp-resin-3d-printer/

Please visit www.DIY3DTech.com for more information on this and many other projects!

Follow us on Instagram:
www.instagram.com/diy3dtech/

Subscribe to the DIY3DTech YouTube Channel:
YouTube.DIY3DTech.com

Subscribe to the DIY3DTech OpenSCAD Channel:
openscad-youtube.diy3dtech.com

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: swag.DIY3DTech.com

K40 eBay Chinese CO2 Laser Cutter & Engraver – Can It Cut Regular Paper for Decorations!

Please visit www.DIY3DTech.com for more information on this and many other projects! As in this episode, we will be cutting paper with the K40 eBay Chinese CO2 Laser Cutter & Engraver! I have had a number of requests for this so decided to give a go and wow was I surprised with what I could do! So if your into high end paper crafts, want to greet or holiday cards which will be the talk of the family for year to come, check out this video as again this machine keep on surprising me!

Want your own K40 eBay Chinese CO2 Laser Cutter & Engraver: diy3dtech.com/purchase-laser/

Follow us on Instagram:
www.instagram.com/diy3dtech/

Subscribe to the DIY3DTech YouTube Channel:
YouTube.DIY3DTech.com

Subscribe to the DIY3DTech OpenSCAD Channel:
openscad-youtube.diy3dtech.com

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: swag.DIY3DTech.com

Orion Motor Tech 12"x 8" 40W CO2 Laser Engraving Machine Engraver Cutter with Exhaust Fan USB Port

by Orion Motor Tech [Orion Motor Tech]
Rank/Rating: 65479/-
Price: $399.99

Inkscape Tutorials – Using Layers to Design a Precision Print Spool Arm!

In this episode, we will be using Inkscape to go from back of napkin to actual printed part for a precision spook holder for the Gearbest Tronxy x5s large scale 3D printer.

Please visit www.DIY3DTech.com for more information on this and many other projects!

Get the Gearbest Tronxy X5S here: diy3dtech.com/gearbest-tronxy-x1-desktop-3d-printer/

Looking for the Creality CR-10 for the cheap and easy well here is a selection: diy3dtech.com/creality-cr-10-best-deals/

Follow us on Instagram: www.instagram.com/diy3dtech/

Subscribe to the DIY3DTech YouTube Channel: YouTube.DIY3DTech.com

Subscribe to the DIY3DTech OpenSCAD Channel:
openscad-youtube.diy3dtech.com

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: swag.DIY3DTech.com

Shop Talk – USB to 12 Volts for Less Than $10 Bucks!

In this episode, we will be looking at the neat find, as you ever needed 12 volts to power something but only have a 5 volt USB power bank? Well that was my problem and I solved for less then $10 bucks! Now I was all set to design my own circuit and all but when I came across this, it was cheaper than I could make one!

Please visit www.DIY3DTech.com for more information on this and many other projects!

ARECORD USB A Male to 12V Car Cigarette Lighter Socket Female Converter: amzn.to/2BdI6lj
KUNCAN Dc 5v to Dc 12v Converter Step Up Voltage Converter 5ft Am to Dc 5.5 x 2.1mm: amzn.to/2zh0OHq
KUNCAN Dc 5v to Dc 9v Converter Step Up Voltage Converter 5ft Am to Dc 5.5 x 2.1mm: amzn.to/2hOehPK
KUNCAN DC 5v To DC 9v or 12v Adjustable Step-up Voltage Regulator Converter with Switch: amzn.to/2hKe14i

Holiday Deals from Gearbest:
3D Printer promotions: www.gearbest.com/promotion-stunning-home-tech-special-622.html
Gadgets Sale: www.gearbest.com/m-promotion-active-382

Follow us on Instagram: www.instagram.com/diy3dtech/

–Our Channel Lists:

Subscribe to the DIY3DTech YouTube Channel: YouTube.DIY3DTech.com

Subscribe to the DIY3DTech OpenSCAD Channel: openscad-youtube.diy3dtech.com

Subscribe to the On-Photography Channel: youtube.on-photography.pictures

Subscribe to the Video-Drone Channel: www.youtube.com/channel/UCdSpKpUH0vZcta5T480330w

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: swag.DIY3DTech.com

iceSL Slicer – Converting an STL to SVG for a Laser or CNC Workflows!

Please visit ift.tt/1PJb2UK for more information on this and many other projects! As in this episode, we will be showing you how to use iceSL (a powerful free slicer) to take STL files and slice then into SVG for use in Laser or CNC workflows!

iceSL Software: ift.tt/2gQup2L

Join the iceSL forum here: ift.tt/2zh3ho9

Check out our new photography and videography channel!
ift.tt/2zhVEP2

Want a BIG 3D printer cheap: ift.tt/2wYvjnN

Follow us on Instagram:
ift.tt/2jEZ5GW

Subscribe to the DIY3DTech YouTube Channel:
ift.tt/1VC4ZnC

Subscribe to the DIY3DTech OpenSCAD Channel:
ift.tt/2dwKTNa

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: ift.tt/1XkkoIg