47 search results for "nozzle"

K40 eBay Chinese CO2 Laser Cutter & Engraver – 3D Printing an Air Assist Nozzle!

 

Please visit www.DIY3DTech.com for more information on this and many other projects! As in this episode we will be 3D printing an air assist nozzle for our new K40 eBay Chinese CO2 Laser Cutter & Engraver!

Looking for the Best Deal on a CO2 Laser?

Purchase Laser!

Follow us on Instagram:
www.instagram.com/diy3dtech/

Subscribe to the DIY3DTech YouTube Channel:
YouTube.DIY3DTech.com

Subscribe to the DIY3DTech OpenSCAD Channel:
openscad-youtube.diy3dtech.com

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: swag.DIY3DTech.com

Fabrikator : TinyBoy Mini 3D Printer – Cleaning The Nozzle with a 0 4 Drill Bit!

Please visit www.DIY3DTech.com for more information on this and many other projects! As in this episode we will be showing how to un-plug a clogged nozzle using a 0.4mm drill bit you can get here (amzn.to/28W0C27) to avoid removing the nozzle however be CAREFULL as the nozzle will be HOT!
Subscribe to the DIY3DTech YouTube Channel:
YouTube.DIY3DTech.com

Subscribe to the DIY3DTech OpenSCAD Channel:
openscad-youtube.diy3dtech.com

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: swag.DIY3DTech.com

Kamo 5PCS 0.4mm Drill Bits for 3D MakerBot Printer Nozzle Cleaning Kit

by KAMO [Kamo]
Rank/Rating: 3090/-
Price: $8.99

Wanhao Duplicator I3 3D Printer – Cleaning a Point 4mm Nozzle

Please visit www.DIY3DTech.com for more information on this and many other projects! As in this episode we will be looking at how to clear a plugged nozzle from the PLA which has decided to make it, its new home.

Blog Post about dissolving PLA (well worth reading!):
www.vinland.com/blog/?p=68

Kamo 5PCS 0.4mm Drill Bits for 3D Printer Nozzle Cleaning Kit:
amzn.to/1RxpcFj

Subscribe to the DIY3DTech YouTube Channel:
YouTube.DIY3DTech.com

3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc)
swag.DIY3DTech.com

Kamo 5PCS 0.4mm Drill Bits for 3D MakerBot Printer Nozzle Cleaning Kit

by KAMO [Kamo]
Rank/Rating: 3090/-
Price: $8.99

BIQU Magician – Unboxing the Lipstick Printer!

In this episode, we will be unboxing and taking a look at the BIQU Magician Lipstick-Sized Delta Rostock 3D Printer (No Need to Assembly Kossel 3D Printer) with 32 Motherboard Controller , 2.8 Inch Touch Screen. This is a low cost fully assembled delta from around $200 bucks! I have wanted to jump into the delta printer genre, yet didn’t want to spend the time on a kit nor the big bucks on a fully assembled one so this offered the perfect entry to test this out! (see more here: amzn.to/2HrbeZn)

Over All Product Description:

-Basic Specification
Printing Technology:FDM(Fused Deposition Modeling)
Product Dimension: 220mm*250mm*470mm
Packing Size: 316mm*450mm
Print Size Φ100 x 150mm
Net Weight:4KG
Gross Weight:9KG

-Software Specification
Operating System: Windows XP/7/8/10,Mac OS
Slicer Software:Cura
Input format:STL,OBJ
Output format:G-Code
Compatible Software:Simplify 3D,Slic3r

-Hardware Specification
Build Volume:Φ100*150mm
Printer Head:Single
Print Accuracy:0.1mm
Positioning Accuracy:0.01mm
Maximum layer resolution:0.1mm-0.4mm
Nozzle Size:0.4mm
Extruder: BIGTREETECH Titan Extruder Clone
Screen: BIGTREETECH 2.8 inch TFT Touch Screen
Motherboard: BIGTREETECH 32bits Board
Filament Diameter:1.75mm
Maximum Loading Speed:100mm/s
Maximum Printing Speed:70mm/s
Supported Print Material:PLA
Material Diameter: 1.75mm
Print Head Power:40W
Input Voltage: AC 100-240V
Power output: DC 12V 10A
Certificate: CE,FCC,RoHs
Connectivity: SD card offline print and USB online print

-Package List
1x Magician Lipstick-Sized 3D Printer
1x250G PLA Filament
1xFilm Pressure Sensor
1xAdapter
4xAllen Wrench
1x Sd Card
1x Card Reader
1xUSB Cable
1x Spatula
1xNozzle Throat
2xNozzle
1xMagician Manual

Please visit www.DIY3DTech.com for more information on this and many other projects!

Follow us on Instagram:
www.instagram.com/diy3dtech/

Subscribe to the DIY3DTech YouTube Channel:
YouTube.DIY3DTech.com

Subscribe to the DIY3DTech OpenSCAD Channel:
openscad-youtube.diy3dtech.com

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: swag.DIY3DTech.com

Creality CR10 – Install the Second Z Axis Step by Step!

In this episode, we will be going step by step to the install our a second Z axis on the Creality CR-10 as I want to up the game on this bad boy to make it a plastic pushing monster that can whip it around like its no-ones business and having a stable X gantry (which is supported by the dual Z access) is critical in my book for success.

Handy Links:
Get your second Z Axis: diy3dtech.com/creality-cr-10-second-z-axis/
Creality Hot-End Parts: diy3dtech.com/creality-cr-10-hot-end-and-parts/
Nozzle removal and cleaning: diy3dtech.com/nozzle-removal-and-cleaning-tools/
Professional clean up tools: diy3dtech.com/3d-print-clean-up-tools/
Go PEI: diy3dtech.com/pei-printing-build-surfaces/
Insulate your heated bed: diy3dtech.com/ceramic-insulation-for-heated-beds/
Dampen your steppers: diy3dtech.com/stepper-motor-vibration-dampeners/
Smoother your steppers: diy3dtech.com/tl-smoother-kit-for-3d-printer-stepper-motors/
Upgrade your MOSFETS: diy3dtech.com/heated-bed-mos-power-module/

Handy Tools:
USB Oscilloscope: diy3dtech.com/hantek-pc-based-usb-digital-oscilloscope/
USB dial indicator: diy3dtech.com/usb-dial-indicator-kit/
Vacuum former: diy3dtech.com/vacuum-former/
Dry-film-lubricant: diy3dtech.com/dupont-teflon-non-stick-dry-film-lubricant/
Contour Gauges: diy3dtech.com/contour-gauges/
FLIR: diy3dtech.com/flir-one-thermal-imaging-camera/
Digital Caliper: diy3dtech.com/digital-caliper-depth-gauge/
Power Screwdriver: diy3dtech.com/cordless-power-precision-screwdriver/
Screwdriver repair tool: diy3dtech.com/stepless-electric-screwdriver-repair-tool/
Air Quality Meters: diy3dtech.com/air-quality-meters-for-3d-printing/
Rotary Tool: diy3dtech.com/dc-6v-24v-mini-rotary-tool-electric-drill/
Scotch Brite Wheels: diy3dtech.com/38mm-abrasive-scotch-brite-wheels-for-dremel/

Please visit www.DIY3DTech.com for more information on this and many other projects!

Follow us on Instagram:
www.instagram.com/diy3dtech/

Subscribe to the DIY3DTech YouTube Channel:
YouTube.DIY3DTech.com

Subscribe to the DIY3DTech OpenSCAD Channel:
openscad-youtube.diy3dtech.com

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: swag.DIY3DTech.com


Creality CR10 – Why I Got a Second Z Axis and You Might Want One Too!

In this episode, we will be talking about why you might want to get a second Z Axis for your Creality CR-10! As I got one so we will take it out of the box together and see whats in there as well as talk about the mechanics.

Deals on Z-Axis for Cerality CR-10: diy3dtech.com/creality-cr-10-second-z-axis/

Handy Links:
Get your second Z Axis: diy3dtech.com/creality-cr-10-second-z-axis/
Creality Hot-End Parts: diy3dtech.com/creality-cr-10-hot-end-and-parts/
Nozzle removal and cleaning: diy3dtech.com/nozzle-removal-and-cleaning-tools/
Professional clean up tools: diy3dtech.com/3d-print-clean-up-tools/
Go PEI: diy3dtech.com/pei-printing-build-surfaces/
Insulate your heated bed: diy3dtech.com/ceramic-insulation-for-heated-beds/
Dampen your steppers: diy3dtech.com/stepper-motor-vibration-dampeners/
Smoother your steppers: diy3dtech.com/tl-smoother-kit-for-3d-printer-stepper-motors/
Upgrade your MOSFETS: diy3dtech.com/heated-bed-mos-power-module/

Looking for a new 3D Printer and what to support the channel? Well here is your chance to also score a deal too:

Amazing BIG Kit printer……: diy3dtech.com/gearbest-tronxy-x5s-high-precision-large-scale-3d-printer/
Original Gearbest version…: diy3dtech.com/gearbest-cr-10-super-large-3d-printer/
Best Deals on a Creality……: diy3dtech.com/creality-cr-10-best-deals/
Have you been bitten……….: diy3dtech.com/gearbest-tevo-black-widow-3d-printer-kit/
Have you seen this…………..: diy3dtech.com/gearbest-tronxy-x1-desktop-3d-printer/
Best Small Kit Deal…………..: diy3dtech.com/tevo-tarantula/
Creality CR-10 Killer………….: diy3dtech.com/gearbest-jgaurora-a5-updated-high-accuracy-3d-printer/
Better then Monoprice Mini: diy3dtech.com/geeetech-e180-mini-3d-printer/

Please visit www.DIY3DTech.com for more information on this and many other projects!

Follow us on Instagram:
www.instagram.com/diy3dtech/

Subscribe to the DIY3DTech YouTube Channel:
YouTube.DIY3DTech.com

Subscribe to the DIY3DTech OpenSCAD Channel:
openscad-youtube.diy3dtech.com

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: swag.DIY3DTech.com

 

GearBest JGAURORA A5 – Watch it Print PETGand Check Out The Results!

In this episode, we will be printing PET-G with the GearBest JGAURORA A5 printer! Also I have to say this thing is still amazing for an out of the box printer and what it can do. Also the bed heated up to 100c in no time at all was printing! Now I didn’t go crazy on retraction being the first PET-G print and wanted to avoid a nozzle clog but all in all the print came out great!

Polyethylene terephthalate: en.wikipedia.org/wiki/Polyethylene_terephthalate

Pet-G Filament: amzn.to/2DYrP7K

Amazing BIG Kit printer……: diy3dtech.com/gearbest-tronxy-x5s-high-precision-large-scale-3d-printer/
Original Gearbest version…: diy3dtech.com/gearbest-cr-10-super-large-3d-printer/
Best Deals on a Creality……: diy3dtech.com/creality-cr-10-best-deals/
Have you been bitten……….: diy3dtech.com/gearbest-tevo-black-widow-3d-printer-kit/
Have you seen this…………..: diy3dtech.com/gearbest-tronxy-x1-desktop-3d-printer/
Best Small Kit Deal…………..: diy3dtech.com/tevo-tarantula/
Creality CR-10 Killer………….: diy3dtech.com/gearbest-jgaurora-a5-updated-high-accuracy-3d-printer/
Better then Monoprice Mini: diy3dtech.com/geeetech-e180-mini-3d-printer/

Please visit www.DIY3DTech.com for more information on this and many other projects!

Follow us on Instagram:
www.instagram.com/diy3dtech/

Subscribe to the DIY3DTech YouTube Channel:
YouTube.DIY3DTech.com

Subscribe to the DIY3DTech OpenSCAD Channel:
openscad-youtube.diy3dtech.com

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: swag.DIY3DTech.com

Geeetech E180 Mini 3D Printer!

Geeetech E180 Mini 3D Printer with WiFi Module Monoprice Mini Killer Better Then Look Here!

Geeetech E180 Mini 3D Printer  E180 features a build volume of 130 x 130 x 130mm and runs at a high traveling speed. Adopting bowden extruder reduces the moving mass of the printing head and allows faster controlled motion, less…

GearBest JGAURORA A5 – Shootout with the Creality CR 10!

So you asked for it and here it is folk! The shoot between the Creality CR-10 (goo.gl/wDNeeH) whom many consider the reigning king of 3P printers and the up and coming GearBest JG AURORA A5 Updated (goo.gl/efnSH4) printer! Now there have been a lot of change “haters” out there saying “how dare you say this is a Creality Killer!” (insert arrogant huff here). So this is going to be bit of a LONG video as I am going to walk feature by feature between the Creality and GearBest JG AURORA A5 so you will want to have a beverage handy! Also below is a ton of additional information on this printer and the shoot-out as well as more of my opinions based upon experience so be sure to read down all the way.

Resource Page: diy3dtech.com/gearbest-jgaurora-a5-resource-page/

Want to see whats inside: diy3dtech.com/whats-inside-the-jgaurora-a5-3d-printer/

IMPORTANT NOTE: The Creality CR-10 used in this comparison is HIGHLY modified and tuned! The GearBest JG AURORA A5 is straight from the box ZERO tuning! This is important to keep in mind because if you are “Joe Average” and buy a Creality and take it out of the box, it will NOT perform as well as the one in the comparison.

Settings for Test Prints:
————————————————————————————————-
Layer thickness: 0.1
Speed: 50mm/sec
Retraction: 6mm at 50mm/sec
Travel Speed: 150mm/sec
Bed Temp: 70(c)
Hotend Temp: Creality 210(c) / JGAURORA A5 200(c)
Pawn URL: www.thingiverse.com/thing:997832
Filament Creality: Hatchbox Red
Filiament JGAURORA A5: White (what was in the box)
————————————————————————————————-

General Parameters for GearBest JG AURORA A5 3D Printer:
————————————————————————————————-
Nozzle diameter: 0.4mm
Nozzle temperature: Room temperature to 250 degree
Product forming size: 305 x 305 x 320mm
Layer thickness: 0.1-0.3mm
Memory card offline print: USB Thumb Drive
LCD Screen: Touch Sensitive Color
Print speed: 10 – 150mm/s
Platform temperature: Room temperature to 110 degree
Material diameter: 1.75mm
————————————————————————————————-

Notes:
————————————————————————————————-
[1] IMHO the lack of the 80mm is not an issue as while it is “possible” to print those extra 80mm, the issue will arise from the fact the Creality has moving bed (unlike say the Tronxy x5s) and thus as print climbs. The center of gravity will shift and induce some level of error. Now this error in many cases can be of acceptable tolerances but this is seconded by occurrence of “need” to print object that tall and trading the 80mm for other feature such as a second Z-Axis motor.

[2] In the videos you will notice what appears to additional hot-end movement for the GearBest JG AURORA A5 3D. I believe (note “believe” and have not confirmed) is due to the firmware’s handling of arc’s and also feels this is what caused the GearBest JG AURORA A5 3D to run a bit longer as this increased “distance” the hot-end had to travel. Now for the “Average Joe” this will not be an issue as to see this you need a microscope. However for the power user, I would recommend reflashing.

[3] Since making this video I have reflashed with Marlin and reduced the stepper motor noise to less then the CR-10 without changing the driver current but not sure I am happy with it. Watch for an up-coming video

[4] Something I forgot to note in my review is that the “contained” movements (i.e. belts and lead screws) give this a major one-up for schools and office setting (homes with younger children too) to avoid injury. Even the hot-end is better shielded with the plate which goes across the front of the X-Axis.
————————————————————————————————-

Interested in getting your own JGAURORA A5 Creality CR-10 killer 3D Printer? Well check out the deals on Gearbest for them here goo.gl/efnSH4 as these folks have been great to work with and are huge supporters of the 3D Printing community!

Please visit www.DIY3DTech.com for more information on this and many other projects!

Follow us on Instagram:
www.instagram.com/diy3dtech/

Subscribe to the DIY3DTech YouTube Channel:
YouTube.DIY3DTech.com

Subscribe to the DIY3DTech OpenSCAD Channel:
openscad-youtube.diy3dtech.com

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: swag.DIY3DTech.com

Inland 1.75mm Black PLA 3D Printer Filament - 1kg Spool (2.2 lbs)

by INLAND [INLAND]
Rank/Rating: 1006/-
Price: $16.99