47 search results for "nozzle"

K40 eBay Chinese CO2 Laser Cutter & Engraver – Balanced 3D Printed Fume Extraction System!

As in this episode, we will be finishing up the new fume extractor for the K40 eBay Chinese CO2 Laser Cutter & Engraver! So far this has been working well for me (as in actuality I finished this about a month or so ago) and with the larger intake the complete evacuation has been far better then the prior design I was using!

Best deals on CO2 Lasers: diy3dtech.com/purchase-laser/
Laser beds: diy3dtech.com/co2-laser-engraver-cutter-honeycomb-bed/
Cheap adjustable bed solution: diy3dtech.com/lab-jack-stand-for-co2-laser/
Upgrade your CO2 Laser Lens: diy3dtech.com/co2-laser-lens-options/
Get Spot on with this: diy3dtech.com/co2-laser-head-focus-diode-module/
You need air aisst: diy3dtech.com/air-assist-nozzle-k40-laser/
Vent your fumes: diy3dtech.com/blower-fans-for-co2-laser-fume-extraction/

Please visit www.DIY3DTech.com for more information on this and many other projects!

Follow us on Instagram:
www.instagram.com/diy3dtech/

Subscribe to the DIY3DTech YouTube Channel:
YouTube.DIY3DTech.com

Subscribe to the DIY3DTech OpenSCAD Channel:
openscad-youtube.diy3dtech.com

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: swag.DIY3DTech.com

K40 eBay Chinese CO2 Laser Cutter & Engraver – Cheap Adjustable Bed Solution!

In this episode, we will be looking a cheap adjustable bed solution for a K40 eBay Chinese CO2 Laser Cutter & Engraver! As I was looking on the Inter-Web for another project one day and saw this Lab Jack-Stand for less then $20 bucks (here: amzn.to/2zaVDZf) and it hit me this could be an affordable (i.e. cheap) adjustable bed solutions for a CO2 laser! However when I looked at the 200mm x 200mm version it was too high fit under the lens carriage but the 4 inch (~100mm x ~100mm) version did. So the solution is I turned to the 3D printer and creating a larger snap on bed with neodymium magnets for hold down as well as “pin” to support material. So check this out as we have placed these designs out on thingiverse too!

Lab Jack-Stand used in video: amzn.to/2zaVDZf
Thingiverse Files: www.thingiverse.com/thing:2661443

Purchase CO2 Laser: diy3dtech.com/purchase-laser/
Honeycomb Beds: diy3dtech.com/co2-laser-engraver-cutter-honeycomb-bed/
Cheap Jack-Stands: diy3dtech.com/lab-jack-stand-for-co2-laser/
Upgraded Lens: diy3dtech.com/co2-laser-lens-options/
Focus Diode: diy3dtech.com/co2-laser-head-focus-diode-module/
Air Assist Nozzle: diy3dtech.com/air-assist-nozzle-k40-laser/
Fume Extration Blowers: diy3dtech.com/blower-fans-for-co2-laser-fume-extraction/

Please visit www.DIY3DTech.com for more information on this and many other projects!

Follow us on Instagram:
www.instagram.com/diy3dtech/

Subscribe to the DIY3DTech YouTube Channel:
YouTube.DIY3DTech.com

Subscribe to the DIY3DTech OpenSCAD Channel:
openscad-youtube.diy3dtech.com

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: swag.DIY3DTech.com

Wanhao Duplicator I3 3D Printer – Modification Updates and Printing TPU!

Please visit www.DIY3DTech.com for more information on this and many other projects! As in this episode, we will be doing a bit of an update on the Wanhao Duplicator I3 3D Printer as we convert it over phenolic bed and high temp bowden hotend!

Check out our new photography and videography channel!
youtube.on-photography.pictures

Want to make this mod? Here are the parts you will need!

Get your E3D Style Hotend here (many to pick from):

E3D V6 Style Hotends and Nozzles!

Need a couple 50mm Radial fans:

50mm Radial Fans!

Need a couple square fans:

50mm Fans!

3D Printable E3D v6 Bowden Adapter for Wanhao Duplicator i3:
www.thingiverse.com/thing:1483921

3D Print Cleanup Tools:

3D Print Clean Up Tools!

Phenolic Sheet for bed:
amzn.to/2yQo4MF

Follow us on Instagram:
www.instagram.com/diy3dtech/

Subscribe to the DIY3DTech YouTube Channel:
YouTube.DIY3DTech.com

Subscribe to the DIY3DTech OpenSCAD Channel:
openscad-youtube.diy3dtech.com

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: swag.DIY3DTech.com

Wanhao Duplicator i3 V2.1 3D Printer

by WANHAO [Wanhao]
Rank/Rating: 223415/-
Price: $349.99

Tronxy X5S – Modifying the Hotend!

Please visit ift.tt/1PJb2UK for more information on this and many other projects! As in this episode, we will be modifying the cooling fan for the hotend of the Tronxy-X5S large scale printer from Gearbest. As one of the things which I noticed is that metal fan shroud had to be removed (major pain) every time the nozzle needed to be unplugged and two it also forces air onto the heater block cooling it too. So off to thing verse we went and found this design (listed below) for the Tronxy-X3 which has the same hotend so we printed it ABS and it fit! So check it it out!

Tronxy X5S Large Scale High Precision 3D Printer by GearBest: goo.gl/fGBspG

High Temp Kapton Polyimide Tape: amzn.to/2yXVnfS
Ceramic Insulation 1″ x 12″ tape: amzn.to/2kGKMUj

Tronxy X3 Supercooler – hot end fan shrouds by idig3d, published Nov 21, 2016: ift.tt/2xJROIV

Fan converter 30×30 to 40×40 for Tronxy supercooler by HidekiShinichi, published Aug 2, 2017: ift.tt/2ys8ybq

Check Out the build manual here: ift.tt/2wkKTuc

Also featured from Gearbest are additional coupons for extra discounts:
“GBTE” / 12% OFF for all the tools: ift.tt/2ulkOq5
And Gearbest autumn harvest party: ift.tt/2x6L4Ju

Follow us on Instagram: ift.tt/2jEZ5GW

Subscribe to the DIY3DTech YouTube Channel: ift.tt/1VC4ZnC

Subscribe to the DIY3DTech OpenSCAD Channel: ift.tt/2dwKTNa

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: ift.tt/1XkkoIg

GearBest Tronxy X1 Desktop 3D Printer!

Click: Tronxy X1 Desktop LCD Display 3D Printer Description: This 3D printer has 150 x 150mm x 150mm build volume, 0.4mm nozzle diameter. It is made from aluminum. Main Features: ● Supports SD card off-line print, especially convenient when without…

GearBest TEVO Black Widow 3D Printer Kit!

TEVO Black Widow 3D Printer Kit by GearBest

Click Here: TEVO Black Widow 3D Printer  Main Features: ● Large printing area up to 370 x 250 x 300mm ● Microstep extruder ( E3D V6 ) is highly tolerant of most printing conditions and is designed to accept the…

Wanhao Duplicator I3 3D Printer – 2N1 Cooler from Thingiverse Part 1 of 2!

Please visit www.DIY3DTech.com for more information on this and many other projects! As in this episode, we will be review a new layer cooling option from a channel viewer and fellow Thingiverse contributor Filament Corner (www.thingiverse.com/FilamentCorner/about) as this guy looks like he has some promise and developed a 2N1 re-director to take air from the 40mm Wanhao extruder fan and send 50% to the nozzle for layer cooling. However Filament Corner’s question was if we could measure “if” and “if-so” how large of an impact this was having on the extruder. So we set off to test this in this two part series so grab some popcorn a soda and kick back!

FLIR ONE Thermal Imager for Android:
amzn.to/2dtPIpP

FLIR ONE Thermal Imager for iOS:
amzn.to/2dgRXOQ

Wanhao 3D Printer Wanhao Duplicator I3
amzn.to/1PwKjK3

Check out the Monoprice MP Select Mini 3D Printer here:
amzn.to/2alpYKU

Follow us on Instagram:
www.instagram.com/diy3dtech/

Subscribe to the DIY3DTech YouTube Channel:
YouTube.DIY3DTech.com

Subscribe to the DIY3DTech OpenSCAD Channel:
openscad-youtube.diy3dtech.com

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: swag.DIY3DTech.com

FLIR ONE Thermal Imager for Android

by FLIR [FLIR]
Rank/Rating: 8353/-
Price: $224.34

Wanhao Duplicator I3 3D Printer – Measuring Hotend Fluctuations With the Flir One IR Camera!

Please visit www.DIY3DTech.com for more information on this and many other projects! As in this episode, we will be using the Flir One Thermal Imager to create a video of the thermal fluctuations of the [hotend] nozzle on the Wanhao. We did hit a few bumps so check it out as it was a little a bit of a learning experience!

FLIR ONE Thermal Imager for Android:
amzn.to/2dtPIpP

FLIR ONE Thermal Imager for iOS:
amzn.to/2dgRXOQ

Follow us on Instagram:
www.instagram.com/diy3dtech/

Subscribe to the DIY3DTech YouTube Channel:
YouTube.DIY3DTech.com

Subscribe to the DIY3DTech OpenSCAD Channel:
openscad-youtube.diy3dtech.com

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: swag.DIY3DTech.com

FLIR ONE Thermal Imager for iOS

by FLIR [FLIR]
Rank/Rating: 6394/-
Price: $235.96