3D Printed Project – Using a Contour Gauge for 3D Design!

Please visit ift.tt/1PJb2UK for more information on this and many other projects! As in this episode, we will be showing you how to use a Contour Gauge to design 3D printable parts! What you don’t have a contour gauge? Well check out this link on Amazon and help support the channel (amzn.to/2qZZBAC)!

Follow us on Instagram:
ift.tt/2jEZ5GW

Subscribe to the DIY3DTech YouTube Channel:
ift.tt/1VC4ZnC

Subscribe to the DIY3DTech OpenSCAD Channel:
ift.tt/2dwKTNa

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: ift.tt/1XkkoIg

Creality CR10 – Analyzing the Heated with the Flir!

Please visit ift.tt/1PJb2UK for more information on this and many other projects! As in this episode, we will be taking a look at the heated bead on the Creality CR-10 3D printer at the request of a viewer as he had a rather good idea! As the CR-10 has a large bed, how does it perform heat wise, is it heating evenly, does it match the temperature it says? Also how hot will it get? These and more questions we will set out to answer using the Flir thermal camera. Also worth note is it is real time from start to 71 deg/C so you get an idea just how long this guy takes to heat up!

Get your own Creality CR-10!
ift.tt/2rMsrH6

Get your PEI sheets here:
ift.tt/2s0mHLd

Check Out the Flir Cameras here!
ift.tt/2sKSrS1

Follow us on Instagram:
ift.tt/2jEZ5GW

Subscribe to the DIY3DTech YouTube Channel:
ift.tt/1VC4ZnC

Subscribe to the DIY3DTech OpenSCAD Channel:
ift.tt/2dwKTNa

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: ift.tt/1XkkoIg

Inkscape Tutorials – Using Layers for 3D Part Design!

Please visit ift.tt/1PJb2UK for more information on this and many other projects! As in this episode, we will be using the layer abilities in Inscape to help create complex 3D designed for printing!

Follow us on Instagram:
ift.tt/2jEZ5GW

Subscribe to the DIY3DTech YouTube Channel:
ift.tt/1VC4ZnC

Subscribe to the DIY3DTech OpenSCAD Channel:
ift.tt/2dwKTNa

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: ift.tt/1XkkoIg

3040 CNC – Using New Water Bath to Engrave a Stone!

Please visit ift.tt/1PJb2UK for more information on this and many other projects! As in this episode, we will be using the 3040 CNC to engrave a beach stone with a diamond ball cutter (amzn.to/2pScOdE)! This is a cottage based project / industry as collects a few cool rocks and engrave them for fun and profit!

Follow us on Instagram:
ift.tt/2jEZ5GW

Subscribe to the DIY3DTech YouTube Channel:
ift.tt/1VC4ZnC

Subscribe to the DIY3DTech OpenSCAD Channel:
ift.tt/2dwKTNa

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: ift.tt/1XkkoIg

Creality CR10 – Making Some Modifications!

Please visit ift.tt/1PJb2UK for more information on this and many other projects! As in this episode, we will be

Follow us on Instagram:
ift.tt/2jEZ5GW

Subscribe to the DIY3DTech YouTube Channel:
ift.tt/1VC4ZnC

Subscribe to the DIY3DTech OpenSCAD Channel:
ift.tt/2dwKTNa

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: ift.tt/1XkkoIg

Creality CR10 – Unboxing and First Prints!

Please visit ift.tt/1PJb2UK for more information on this and many other projects! As in this episode, we will be unboxing and doing some first prints on the amazing Creality CR10!

Check it out here as its an amazing printer!
ift.tt/2rMsrH6

Follow us on Instagram:
ift.tt/2jEZ5GW

Subscribe to the DIY3DTech YouTube Channel:
ift.tt/1VC4ZnC

Subscribe to the DIY3DTech OpenSCAD Channel:
ift.tt/2dwKTNa

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: ift.tt/1XkkoIg

Creality CR-10 3D Printer Aluminum With Heated Bed High-precisio Free Testing Filament+Free Tool Set

by Creality 3D [Creality 3D]
Rank/Rating: 28681/-
Price: $538.00

3040 CNC – New Water Bath Design!

Please visit ift.tt/1PJb2UK for more information on this and many other projects! As in this episode, we will be looking at new water design for milling objects such as stones, glass and carbon where hear dangerous particulate matter is at issue.

Also if you looking for the mini-vice I used in this build, you can order it here: goo.gl/kw9oaH

Follow us on Instagram:
ift.tt/2jEZ5GW

Subscribe to the DIY3DTech YouTube Channel:
ift.tt/1VC4ZnC

Subscribe to the DIY3DTech OpenSCAD Channel:
ift.tt/2dwKTNa

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: ift.tt/1XkkoIg

3040 CNC – Inkscape to Cut Out with ABS!

Please visit ift.tt/1PJb2UK for more information on this and many other projects! As in this episode, we will be using Inkscape to design a part and then head over the CNC to cut out of some ABS sheet stock with a single flute cutter which has been working out well for us in the shop.

Single flute 3.175mm (1/8th”) Bit:
amzn.to/2ouZuNQ

Follow us on Instagram:
ift.tt/2jEZ5GW

Subscribe to the DIY3DTech YouTube Channel:
ift.tt/1VC4ZnC

Subscribe to the DIY3DTech OpenSCAD Channel:
ift.tt/2dwKTNa

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: ift.tt/1XkkoIg

3D Printed Project – Finger Nut for the Y Axis on the 3040 CNC!

Please visit ift.tt/1PJb2UK for more information on this and many other projects! As in this episode, we will be designing and 3D printing a finger for the front of the 3040 CNC as with the motor at the rear its difficult to adjust the gantry so we will use 3D printing to solve the problem!

Follow us on Instagram:
ift.tt/2jEZ5GW

Subscribe to the DIY3DTech YouTube Channel:
ift.tt/1VC4ZnC

Subscribe to the DIY3DTech OpenSCAD Channel:
ift.tt/2dwKTNa

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: ift.tt/1XkkoIg

3D Printed Project – 3D Printed Plastic Clean Up Tool!

Please visit ift.tt/1PJb2UK for more information on this and many other projects! As in this episode, we will be showing you how to make your own plastic clean up tool from 1/8th (3mm) CNC bits to speed along your 3D printing working and improve the looks of your finial product on the cheap!

Mixed Bit Package:
amzn.to/2o7HJ5G

Follow us on Instagram:
ift.tt/2jEZ5GW

Subscribe to the DIY3DTech YouTube Channel:
ift.tt/1VC4ZnC

Subscribe to the DIY3DTech OpenSCAD Channel:
ift.tt/2dwKTNa

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: ift.tt/1XkkoIg

SHAVIV 90060 MANGO IIB + B10 + B20

by SHAVIV [VARGUS]
Rank/Rating: 78473/-
Price: $11.25

 

Inkscape Tutorials – Rapid Part Replication for CNC Production Part 2!

Please visit ift.tt/1PJb2UK for more information on this and many other projects! As in this episode, we will be making some chips and I don’t mean fish and chips but plastic ones as we go the 3040 CNC and cut out our rapidly copied piece from the last episode! How will it come out you ask? Well take a load off, kick back and check it out!

Follow us on Instagram:
ift.tt/2jEZ5GW

Subscribe to the DIY3DTech YouTube Channel:
ift.tt/1VC4ZnC

Subscribe to the DIY3DTech OpenSCAD Channel:
ift.tt/2dwKTNa

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: ift.tt/1XkkoIg

Inkscape Tutorials – Rapid Part Replication for CNC Production Part 1!

Please visit ift.tt/1PJb2UK for more information on this and many other projects! As in this episode, we will be looking raid replication of a part! In a prior episode we showed you how to scan and recreate an object. However what if you just want to make a quick down and dirty copy? Well we are going to show you as we actually do it!

Follow us on Instagram:
ift.tt/2jEZ5GW

Subscribe to the DIY3DTech YouTube Channel:
ift.tt/1VC4ZnC

Subscribe to the DIY3DTech OpenSCAD Channel:
ift.tt/2dwKTNa

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: ift.tt/1XkkoIg