Tag: big 3d printer

Tronxy X5S – Super Insulating for Only 5 Bucks!

Please visit ift.tt/1PJb2UK for more information on this and many other projects! As in this episode, we will be

Follow us on Instagram:
ift.tt/2jEZ5GW

Subscribe to the DIY3DTech YouTube Channel:
ift.tt/1VC4ZnC

Subscribe to the DIY3DTech OpenSCAD Channel:
ift.tt/2dwKTNa

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: ift.tt/1XkkoIg

Tronxy X5S – Modified Bed Leveling Knobs for Better Prints!

Please visit ift.tt/1PJb2UK for more information on this and many other projects! As in this episode, we will be modifying the the bed leveling from the Gearbest Tronxy-X5S with a remix we created based upon a model we found on Thingiverse for the Cerality CR-10 3D printer (here is the original: ift.tt/2upF35b) so the remix uses a standard M3 nut so this will also work on any printer where it fits size wise as well as uses an M3 nut.

Worth note is that we designed the nut opening to have a bit of a tapper so the fit will be tight and we suggest placing the nut on the end of bolt and tapping it lightly with a small hammer.

Remixed Bed Leveling Wheel for Tronxy X5S and Other M3 Based Printers!
ift.tt/2xTR7Ni

Follow us on Instagram:
ift.tt/2jEZ5GW

Subscribe to the DIY3DTech YouTube Channel:
ift.tt/1VC4ZnC

Subscribe to the DIY3DTech OpenSCAD Channel:
ift.tt/2dwKTNa

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: ift.tt/1XkkoIg

Tronxy X5S – Modifying the Hotend!

Please visit ift.tt/1PJb2UK for more information on this and many other projects! As in this episode, we will be modifying the cooling fan for the hotend of the Tronxy-X5S large scale printer from Gearbest. As one of the things which I noticed is that metal fan shroud had to be removed (major pain) every time the nozzle needed to be unplugged and two it also forces air onto the heater block cooling it too. So off to thing verse we went and found this design (listed below) for the Tronxy-X3 which has the same hotend so we printed it ABS and it fit! So check it it out!

Tronxy X5S Large Scale High Precision 3D Printer by GearBest: goo.gl/fGBspG

High Temp Kapton Polyimide Tape: amzn.to/2yXVnfS
Ceramic Insulation 1″ x 12″ tape: amzn.to/2kGKMUj

Tronxy X3 Supercooler – hot end fan shrouds by idig3d, published Nov 21, 2016: ift.tt/2xJROIV

Fan converter 30×30 to 40×40 for Tronxy supercooler by HidekiShinichi, published Aug 2, 2017: ift.tt/2ys8ybq

Check Out the build manual here: ift.tt/2wkKTuc

Also featured from Gearbest are additional coupons for extra discounts:
“GBTE” / 12% OFF for all the tools: ift.tt/2ulkOq5
And Gearbest autumn harvest party: ift.tt/2x6L4Ju

Follow us on Instagram: ift.tt/2jEZ5GW

Subscribe to the DIY3DTech YouTube Channel: ift.tt/1VC4ZnC

Subscribe to the DIY3DTech OpenSCAD Channel: ift.tt/2dwKTNa

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: ift.tt/1XkkoIg

Tronxy X5S – First Prints and Discussion!

Please visit ift.tt/1PJb2UK for more information on this and many other projects! As in this episode, we will be putting the Tronxy X5S large scale printer to the test! Having just finished the build I am excited to start pushing plastic out of it so lets do it!

Check Out the build manual here:
ift.tt/2wkKTuc

Also featured from Gearbest are additional coupons for extra discounts:
“GBTE” / 12% OFF for all the tools: ift.tt/2ulkOq5
And Gearbest autumn harvest party: ift.tt/2x6L4Ju

Tronxy X5S Large Scale High Persion 3D Printer by GearBest:
goo.gl/fGBspG

Follow us on Instagram:
ift.tt/2jEZ5GW

Subscribe to the DIY3DTech YouTube Channel:
ift.tt/1VC4ZnC

Subscribe to the DIY3DTech OpenSCAD Channel:
ift.tt/2dwKTNa

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: ift.tt/1XkkoIg

Creality CR10 – Dry Lubricating the Z Axis with Teflon!

Please visit ift.tt/1PJb2UK for more information on this and many other projects! As in this episode, we will be cleaning and dry lubricating the Z-Axis of the Creality CR10 printer with Teflon and please note this works with any lead screw 3D Printer or even CNC machine!

Advantages over standard lubricants:
–Unique 100% dry-film Teflon coating and lubricant
–Clean, long-lasting micro-thin, dirt-resistant coating effective from -100F to +500F
–Uses proprietary resin-bonding technology for tight tolerance, metal-on-metal applications
–Creates a thin, dirt-repelling, chemical-resistant coating
–Safe for all surfaces does not contain silicone (non-food)

Squeeze bottle:
amzn.to/2vYTjCS

14 Ounce Spay Can:
amzn.to/2uViyJp

GCode to Jog Z Axis:
ift.tt/2v5loLM

Follow us on Instagram:
ift.tt/2jEZ5GW

Subscribe to the DIY3DTech YouTube Channel:
ift.tt/1VC4ZnC

Subscribe to the DIY3DTech OpenSCAD Channel:
ift.tt/2dwKTNa

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: ift.tt/1XkkoIg

Shop Talk – Yes Cork Really Burns and More On Safely Insulating Heated Beds!

Please visit ift.tt/1PJb2UK for more information on this and many other projects! As in this episode, we will be following up a prior video where we insulted the heated bed of the Creality CR-10 and created a bit of controversy over the use of “cork” as an insulator as well as does it matter what side of the Thermotec insinuative material we use? We will answer all of these questions and maybe more.

Thermo-Tec 13575 12″ X 24″ Adhesive Backed Heat Barrier:
amzn.to/2tpZZd9

Thermotec Web Siite:
ift.tt/2vlnXqy

Also here is the CHEP video where Chuck discovers a short in the heated bed of the Wanhao:

3d Printer Catches Fire In House | 3d Printing Safety:

Follow us on Instagram:
ift.tt/2jEZ5GW

Subscribe to the DIY3DTech YouTube Channel:
ift.tt/1VC4ZnC

Subscribe to the DIY3DTech OpenSCAD Channel:
ift.tt/2dwKTNa

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: ift.tt/1XkkoIg

HICTOP Creality CR-10 3D Printer Prusa I3 DIY Kit Aluminum Large Print Size 300x300x400mm

by HICTOP [HIC Technology]
Rank/Rating: 1134/-
Price: $499.00

Creality CR10 – Printing a RoboSpider Amazon Echo Dot Stand!

Please visit ift.tt/1PJb2UK for more information on this and many other projects! As in this episode, I was inspired to create this from the Sci-Fi movie Pacific Rim (amzn.to/2ue6p0M0) as to “Combat Monsters you have to build Monsters of your own”. The model is rather straight forward and easy to print as well as providing a stark conversational look where it is sure to be a conversation piece in any office or home! In addition it also offers many finishing option should you (or significant other) not like the 3D printed look (which my wife doesn’t) as you can use a stone spray paint such this (amzn.to/2ue7gyw) which my wife even approves of or a lighter textured version such as this (amzn.to/2uewehx) to cover the layer lines. However, any way you decide to go, this functional piece of art is sure to give you a smile (or scare) every day!

Also note you can use the holes in the legs to run the wire neatly though (hidden feature of the design) providing for a clean seamless steam punk or reto-modern decor look!

Note: this things assembles via pressure fit and while you can glue it, it is not required however to achieve this the interlocking slots are very tight and depending on the plastic you use may require some clean up with a bur tool (such as this: amzn.to/2uek6gg) as well as a small file set (such as this: amzn.to/2uexS2u) to achieve the required fit of the parts.

Amazon Echo Dot Robo-Spider Base!
ift.tt/2uivjwk

Follow us on Instagram:
ift.tt/2jEZ5GW

Subscribe to the DIY3DTech YouTube Channel:
ift.tt/1VC4ZnC

Subscribe to the DIY3DTech OpenSCAD Channel:
ift.tt/2dwKTNa

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: ift.tt/1XkkoIg

HICTOP Creality CR-10 3D Printer Prusa I3 DIY Kit Aluminum Large Print Size 300x300x400mm

by HICTOP [HIC Technology]
Rank/Rating: 1134/-
Price: $499.00

Creality CR10 – AntiTip Over Solution!

Please visit ift.tt/1PJb2UK for more information on this and many other projects! As in this episode, we will be taking a look at an “Anti-Tip Over” bracket which I whipped up in Open SCAD to help prevent the cntrol box of Creality CR-10 with a spool of filament from tipping over while printing!

Creality CR-10 Anti-Tip Bracket and Tool Holder!
ift.tt/2u2vxrh

Follow us on Instagram:
ift.tt/2jEZ5GW

Subscribe to the DIY3DTech YouTube Channel:
ift.tt/1VC4ZnC

Subscribe to the DIY3DTech OpenSCAD Channel:
ift.tt/2dwKTNa

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: ift.tt/1XkkoIg

HICTOP Creality CR-10 3D Printer Prusa I3 DIY Kit Aluminum Large Print Size 300x300x400mm

by HICTOP [HIC Technology]
Rank/Rating: 1134/-
Price: $499.00

Creality CR10 – Camera Mount for Time Lapses from Above!

Please visit ift.tt/1PJb2UK for more information on this and many other projects! Since I wanted to get top profile view time-lapse from my Creality CR-10 printer, I designed this camera mount which will slip over a 20×20 rail and allow the mounting of 1/4-20 standard tripod ball head like this one amzn.to/2sRYcwj to allow me finer adjustment I designed this simple top mounted camera adapter. Also here is the nylon thumb screw ( amzn.to/2uaY3Ip ) I use for the pass though so I can swap ball mounts and camera quickly.

Creality CR-10 and Other 20×20 Rail Type Camera Mount!
ift.tt/2us44kf

Follow us on Instagram:
ift.tt/2jEZ5GW

Subscribe to the DIY3DTech YouTube Channel:
ift.tt/1VC4ZnC

Subscribe to the DIY3DTech OpenSCAD Channel:
ift.tt/2dwKTNa

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: ift.tt/1XkkoIg

Creality CR10 – Measuring Glass Bed Heat Transfer With Flir Camera!

Please visit ift.tt/1PJb2UK for more information on this and many other projects! As in this episode, we will be measuring the heat transfer from the Creality CR-10 stock glass bed as does it compare with the PEI, are there hot spots? Well we will try and answer those and many other questions as we continue our look at the heated bed of the Creality CR-10!

Get your own Creatlity CR-10:
ift.tt/2rMsrH6

Follow us on Instagram:
ift.tt/2jEZ5GW

Subscribe to the DIY3DTech YouTube Channel:
ift.tt/1VC4ZnC

Subscribe to the DIY3DTech OpenSCAD Channel:
ift.tt/2dwKTNa

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: ift.tt/1XkkoIg