Tag: CNC

Creality CR10 – Camera Mount for Time Lapses from Above!

Please visit ift.tt/1PJb2UK for more information on this and many other projects! Since I wanted to get top profile view time-lapse from my Creality CR-10 printer, I designed this camera mount which will slip over a 20×20 rail and allow the mounting of 1/4-20 standard tripod ball head like this one amzn.to/2sRYcwj to allow me finer adjustment I designed this simple top mounted camera adapter. Also here is the nylon thumb screw ( amzn.to/2uaY3Ip ) I use for the pass though so I can swap ball mounts and camera quickly.

Creality CR-10 and Other 20×20 Rail Type Camera Mount!
ift.tt/2us44kf

Follow us on Instagram:
ift.tt/2jEZ5GW

Subscribe to the DIY3DTech YouTube Channel:
ift.tt/1VC4ZnC

Subscribe to the DIY3DTech OpenSCAD Channel:
ift.tt/2dwKTNa

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: ift.tt/1XkkoIg

3D Printed Project – CHEP Inspired Redesign!

Please visit ift.tt/1PJb2UK for more information on this and many other projects! As in this episode, we will be taking our inspiration from Chuck Helebuyck over at CHEP as it seemed Orange is the New Black was a rerun so the next best thing which wasn’t a rerun happen to be Chucks new video (at the time) www.youtube.com/watch?v=hvZjTy3EdQ4&t=286s where showed us how to create this neat comb-thing (I am sure the girls in prison would have turned this into a shank or something on the show) to hang on the wall. But after watching, I said “self” we have been wanting to print one of these for a while however we don’t have a wall but we do have desks and shelf’s so how do we solve this this problem? Well “self” said back, you know Tinkercad, yea I know you Fusion 360 cats out here are rolling your eyes but hey if it an’t broke, don’t fix it right? Yea you know what I am talking about as Tinkercad is that secret little pleasure sort of like sneaking to the refrigerator late at night to steal that last piece of chocolate cake and glass of milk only to have confront your [angry] wife in the the morning with a Cheshire cat grin and a drawn out “whaaaaat” as she gives you the bad eye.

Follow us on Instagram:
ift.tt/2jEZ5GW

Subscribe to the DIY3DTech YouTube Channel:
ift.tt/1VC4ZnC

Subscribe to the DIY3DTech OpenSCAD Channel:
ift.tt/2dwKTNa

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: ift.tt/1XkkoIg

Creality CR10 – Measuring PEI Heat Transfer With Flir Camera!

Please visit ift.tt/1PJb2UK for more information on this and many other projects! As in this episode, we will be measuring the heat transfer from the [heated] bed of the Creality CR-10 through the PEI printing surface as just how much heat does it transfer? Also near the end again will show removing the tape and only reading from the (through PEI) the bare metal bed.

Get your own Creality CR-10!
ift.tt/2rMsrH6

Get your PEI sheets here:
ift.tt/2s0mHLd

Check Out the Flir Cameras here!
ift.tt/2sKSrS1

Follow us on Instagram:
ift.tt/2jEZ5GW

Subscribe to the DIY3DTech YouTube Channel:
ift.tt/1VC4ZnC

Subscribe to the DIY3DTech OpenSCAD Channel:
ift.tt/2dwKTNa

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: ift.tt/1XkkoIg

Creality CR10 – 3D Printed Dial Indicator Mount for Bed Leveling!

Please visit ift.tt/1PJb2UK for more information on this and many other projects! As in this episode, we will be looking at dial indicator mount which we designed for the Creality CR-10 mega 3D Printer (if you want one click here: goo.gl/FthFpE) which uses economical dial indicators to assist you in leveling / tramming the large bed of this beast!

This is a Dial Indicator Mount for the Creality CR-10 (click here: goo.gl/FthFpE) uses economical dial indicators such as this one amzn.to/2ttaAGr for less than $15 bucks or a digital version such as this amzn.to/2ttaIWr for only $25 bucks.

Also you can use a metal 1/4-20 (~6mm) sized nut and bolt combo however I like using nylon nuts/bolts such as this amzn.to/2saaeRh just to lighten things. I have designed two Gcode files to be used running the dial across the Creality CR-10 bed and they can be found here: ift.tt/2sawKtj

If you are looking for my other video using a dial indicator to level or tramm the bed here is the link: youtu.be/JccLBnHWG0k

Creality CR-10 Dial Indicator Mount for Bed Level/Tramming
ift.tt/2ttfbZx

Affordable Dial Indicators:
Electronic Digital Indicator Gauge:
amzn.to/2tt0jKs

Triton 1″ Dial Indicator 0.001″ Graduation:
amzn.to/2tyihM6

Follow us on Instagram:
ift.tt/2jEZ5GW

Subscribe to the DIY3DTech YouTube Channel:
ift.tt/1VC4ZnC

Subscribe to the DIY3DTech OpenSCAD Channel:
ift.tt/2dwKTNa

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: ift.tt/1XkkoIg

Shop Talk – Measuring Your Heated Bed With an IR Thermometer!

Please visit ift.tt/1PJb2UK for more information on this and many other projects! As in this episode, we will be following up a prior video where I measure the heat distribution of the heated bed of the Creality CR-10 as there was a discussion around “hey you can’t measure a shinny surface with a Flir”. So I took on that challenge and here is what I have come up with!

Get your own Creality CR-10!
ift.tt/2rMsrH6

Get your PEI sheets here:
ift.tt/2s0mHLd

Check Out the Flir Cameras here!
ift.tt/2sKSrS1

Follow us on Instagram:
ift.tt/2jEZ5GW

Subscribe to the DIY3DTech YouTube Channel:
ift.tt/1VC4ZnC

Subscribe to the DIY3DTech OpenSCAD Channel:
ift.tt/2dwKTNa

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: ift.tt/1XkkoIg

3D Printed Project – Using a Contour Gauge for 3D Design!

Please visit ift.tt/1PJb2UK for more information on this and many other projects! As in this episode, we will be showing you how to use a Contour Gauge to design 3D printable parts! What you don’t have a contour gauge? Well check out this link on Amazon and help support the channel (amzn.to/2qZZBAC)!

Follow us on Instagram:
ift.tt/2jEZ5GW

Subscribe to the DIY3DTech YouTube Channel:
ift.tt/1VC4ZnC

Subscribe to the DIY3DTech OpenSCAD Channel:
ift.tt/2dwKTNa

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: ift.tt/1XkkoIg

Inkscape Tutorials – Using Layers for 3D Part Design!

Please visit ift.tt/1PJb2UK for more information on this and many other projects! As in this episode, we will be using the layer abilities in Inscape to help create complex 3D designed for printing!

Follow us on Instagram:
ift.tt/2jEZ5GW

Subscribe to the DIY3DTech YouTube Channel:
ift.tt/1VC4ZnC

Subscribe to the DIY3DTech OpenSCAD Channel:
ift.tt/2dwKTNa

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: ift.tt/1XkkoIg

3040 CNC – Using New Water Bath to Engrave a Stone!

Please visit ift.tt/1PJb2UK for more information on this and many other projects! As in this episode, we will be using the 3040 CNC to engrave a beach stone with a diamond ball cutter (amzn.to/2pScOdE)! This is a cottage based project / industry as collects a few cool rocks and engrave them for fun and profit!

Follow us on Instagram:
ift.tt/2jEZ5GW

Subscribe to the DIY3DTech YouTube Channel:
ift.tt/1VC4ZnC

Subscribe to the DIY3DTech OpenSCAD Channel:
ift.tt/2dwKTNa

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: ift.tt/1XkkoIg

Creality CR10 – Making Some Modifications!

Please visit ift.tt/1PJb2UK for more information on this and many other projects! As in this episode, we will be

Follow us on Instagram:
ift.tt/2jEZ5GW

Subscribe to the DIY3DTech YouTube Channel:
ift.tt/1VC4ZnC

Subscribe to the DIY3DTech OpenSCAD Channel:
ift.tt/2dwKTNa

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: ift.tt/1XkkoIg

Creality CR10 – Unboxing and First Prints!

Please visit ift.tt/1PJb2UK for more information on this and many other projects! As in this episode, we will be unboxing and doing some first prints on the amazing Creality CR10!

Check it out here as its an amazing printer!
ift.tt/2rMsrH6

Follow us on Instagram:
ift.tt/2jEZ5GW

Subscribe to the DIY3DTech YouTube Channel:
ift.tt/1VC4ZnC

Subscribe to the DIY3DTech OpenSCAD Channel:
ift.tt/2dwKTNa

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: ift.tt/1XkkoIg