In this episode, we will be breaking a diamond bit! Yes this is one of those video’s where Hollywood forgot to step in and you see the real deal as well as a grown man cry. Yet I promise all of my viewers you get to see real life on this channel as that is part of the fun!
If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: swag.DIY3DTech.com
In this episode, we will be at some abberative issue from CURA, as I started this episode out about this doggie p–p bag holder I designed in Open SCAD (see more here: ) yet after printing some strange things happened and figured I would share that! If you want the Doggie P–p Bag holder or the Open SCAD to make your own scalable bag holder, you can find it here:
If your looking for a new 3D Printer and want something cool as well as to help me out, then check out these links below!
If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: swag.DIY3DTech.com
In this episode, we will be looking at setting the Auto Leveling feature of the ZoneStar Dual Extruder Printer (see more here: diy3dtech.com/zonestar ) from Gear Best! This for the money has become newest fav kit printer over yes event he Tevo Taratural!
If your looking for a new 3D Printer and want something cool as well as to help me out, then check out these links below!
If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: swag.DIY3DTech.com
In this episode, we will be cutting a Near InfraRed (NIR) filter from standard 52mm camera setup for my DJI Mavic Pro Drone! The last time the filter won, yet this time I am gear up for the win! As I am going to use a 1.7mm Diamond Bur bit cutting at 3mm/sec (instead of 20 mm/sec) and a plunge rate of 0.2mm instead of 0,5mm and we found success. Now there was some slight scalloping at the edge, and I think if I would have used plunge of 0.1 this would have improved. Yet I did account for this in the design as I only need around 16mm clear and I cut to 19mm so it should work!
If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: swag.DIY3DTech.com
In this episode, we will be cutting optical gel film with the K40 CO2 laser! So I am designing an DIY IT (Near Infrared Filter) for my DJI Mavic Pro drone and need to cut some perfect circle so I turned to my trusty CO2 laser! Got to tell these things for the money are handy and if your thinking of getting your own check this list: diy3dtech.com/purchase-laser/ for the best deals!
Now a bit of a PSA Warning as fumes from laser cutters can be poisonous and frankly I have no idea what this stuff is made out so ensure you are using this with proper fume extraction and ventilation!
If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: swag.DIY3DTech.com
In this episode, we will be looking at getting near resin quality out our FDM printers using Cura and a couple key settings. I ran across the concept here: www.youtube.com/watch?v=qDW7g3JOqLA&t=926s However when you boil it all down, it seems to be (1) treating all layers as “top layers”, (2) printing crazy fine layers like 0.05 and finial (3) slowing everything down (20 mm/s). Yet was presently surprised by the results, yet be forewarned, your print times will go through the roof.
If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: swag.DIY3DTech.com
In this episode, we will be using small build sheets (see more here: diy3dtech.com/small_build_sheets) to modify the BQU Magician bed! This small delta has been a great printer (see more here: diy3dtech.com/BIQUMagicianDelta3dprinter ) yet the it could also be a little better with this modified bed design as direct printing is too sticky and the glue well is a pain so picked up these 125mm x 125mm build sheets (again see here: diy3dtech.com/small_build_sheets) and simply cut them to fit. Now this isn’t earth stattering by an means, yet figured it was still worth sharing!
If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: swag.DIY3DTech.com
In this episode, we will be showing you an easy mod for the Alfawise U20 3D printer to allow you hassle free printing of TPU! With the addition of a simple 3D printed part designed by 3dMakernoob (see more here: www.thingiverse.com/thing:2965038) you can now print TPU rather effortlessly!
If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: swag.DIY3DTech.com
In this episode, we will be installing an X-Axis action camera mount for the Alfawise U20 and Creality CR-10 printers. This is a cool camera mount as it attaches to the X gantry and moves up with the rising print providing a unique view of build process.
You also need some of these M3 Bolts and Stand-offs: amzn.to/2KfhMzh
If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: swag.DIY3DTech.com
In this episode, we will be testing out these Z Axis jigs for the Zonestar P802QR2 (see more here: diy3dtech.com/zonestar) to level up both sides of the gantry. In the end they turned out to be a handy tool and you see more about them here: www.thingiverse.com/thing:2538266
If your looking for a new 3D Printer and want something cool as well as to help me out, then check out these links below!
If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: swag.DIY3DTech.com
