Tag: wanhao

Wanhao Duplicator I3 3D Printer – Modification Updates and Printing TPU!

Please visit www.DIY3DTech.com for more information on this and many other projects! As in this episode, we will be doing a bit of an update on the Wanhao Duplicator I3 3D Printer as we convert it over phenolic bed and high temp bowden hotend!

Check out our new photography and videography channel!
youtube.on-photography.pictures

Want to make this mod? Here are the parts you will need!

Get your E3D Style Hotend here (many to pick from):

E3D V6 Style Hotends and Nozzles!

Need a couple 50mm Radial fans:

50mm Radial Fans!

Need a couple square fans:

50mm Fans!

3D Printable E3D v6 Bowden Adapter for Wanhao Duplicator i3:
www.thingiverse.com/thing:1483921

3D Print Cleanup Tools:

3D Print Clean Up Tools!

Phenolic Sheet for bed:
amzn.to/2yQo4MF

Follow us on Instagram:
www.instagram.com/diy3dtech/

Subscribe to the DIY3DTech YouTube Channel:
YouTube.DIY3DTech.com

Subscribe to the DIY3DTech OpenSCAD Channel:
openscad-youtube.diy3dtech.com

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: swag.DIY3DTech.com

Wanhao Duplicator i3 V2.1 3D Printer

by Wanhao [Wanhao]
Rank/Rating: 371403/-
Price: $479.00

Wanhao Duplicator I3 3D Printer – 2N1 Cooler from Thingiverse Part 2 of 2!

Please visit www.DIY3DTech.com for more information on this and many other projects! As in this episode, we will be conducting a “control” test and then we will install the diverter and retest the same control print. So how do you think this will turn out. Well, it surprised us, sort of! So pull up a chair as this one will keep you on the edge of it to the very end!

FLIR ONE Thermal Imager for Android:
amzn.to/2dtPIpP

FLIR ONE Thermal Imager for iOS:
amzn.to/2dgRXOQ

Wanhao 3D Printer Wanhao Duplicator I3
amzn.to/1PwKjK3

Check out the Monoprice MP Select Mini 3D Printer here:
amzn.to/2alpYKU

Follow us on Instagram:
www.instagram.com/diy3dtech/

Subscribe to the DIY3DTech YouTube Channel:
YouTube.DIY3DTech.com

Subscribe to the DIY3DTech OpenSCAD Channel:
openscad-youtube.diy3dtech.com

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: swag.DIY3DTech.com

FLIR ONE Thermal Imager for Android

by FLIR [FLIR]
Rank/Rating: 6669/-
Price: -

Wanhao Duplicator I3 3D Printer – 2N1 Cooler from Thingiverse Part 1 of 2!

Please visit www.DIY3DTech.com for more information on this and many other projects! As in this episode, we will be review a new layer cooling option from a channel viewer and fellow Thingiverse contributor Filament Corner (www.thingiverse.com/FilamentCorner/about) as this guy looks like he has some promise and developed a 2N1 re-director to take air from the 40mm Wanhao extruder fan and send 50% to the nozzle for layer cooling. However Filament Corner’s question was if we could measure “if” and “if-so” how large of an impact this was having on the extruder. So we set off to test this in this two part series so grab some popcorn a soda and kick back!

FLIR ONE Thermal Imager for Android:
amzn.to/2dtPIpP

FLIR ONE Thermal Imager for iOS:
amzn.to/2dgRXOQ

Wanhao 3D Printer Wanhao Duplicator I3
amzn.to/1PwKjK3

Check out the Monoprice MP Select Mini 3D Printer here:
amzn.to/2alpYKU

Follow us on Instagram:
www.instagram.com/diy3dtech/

Subscribe to the DIY3DTech YouTube Channel:
YouTube.DIY3DTech.com

Subscribe to the DIY3DTech OpenSCAD Channel:
openscad-youtube.diy3dtech.com

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: swag.DIY3DTech.com

FLIR ONE Thermal Imager for Android

by FLIR [FLIR]
Rank/Rating: 6669/-
Price: -

3D Printer Talk – The Winner Dead Time or PID and What’s with the Wanhao! Part 4

Please visit www.DIY3DTech.com for more information on this and many other projects! As in this episode, we will be we will wrap this 4 part series with some surprising information!

Extruder Pid Tuning

Extruder PID Tuning

Dead-time Control

Dead-time Control

Follow us on Instagram:
www.instagram.com/diy3dtech/

Subscribe to the DIY3DTech YouTube Channel:
YouTube.DIY3DTech.com

Subscribe to the DIY3DTech OpenSCAD Channel:
openscad-youtube.diy3dtech.com

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: swag.DIY3DTech.com

Wanhao Duplicator I3 3D Printer – Measuring Hotend Fluctuations With the Flir One IR Camera!

Please visit www.DIY3DTech.com for more information on this and many other projects! As in this episode, we will be using the Flir One Thermal Imager to create a video of the thermal fluctuations of the [hotend] nozzle on the Wanhao. We did hit a few bumps so check it out as it was a little a bit of a learning experience!

FLIR ONE Thermal Imager for Android:
amzn.to/2dtPIpP

FLIR ONE Thermal Imager for iOS:
amzn.to/2dgRXOQ

Follow us on Instagram:
www.instagram.com/diy3dtech/

Subscribe to the DIY3DTech YouTube Channel:
YouTube.DIY3DTech.com

Subscribe to the DIY3DTech OpenSCAD Channel:
openscad-youtube.diy3dtech.com

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: swag.DIY3DTech.com

FLIR ONE Thermal Imager for iOS

by FLIR [FLIR]
Rank/Rating: 5992/-
Price: $235.96

Wanhao Duplicator I3 3D Printer – Are you at RISK because of the Heated Bed?

Please visit www.DIY3DTech.com for more information on this and many other projects! As in this episode, we will be taking a closer look at the heated bed on the Wanhao i3 Duplicator as there have reports of issues in the internet where connectors have melted (plus.google.com/b/108446642505018849936/101552190891322750505/posts/Nx6cdteBh1o?pageId=108446642505018849936) so in the name of safety and raw curiosity I cracked open the case of my Wanhao i3 Duplicator and took a peek and this video is what I found.

FLIR ONE Thermal Imager for Android:
amzn.to/2dtPIpP

FLIR ONE Thermal Imager for iOS:
amzn.to/2dgRXOQ

Follow us on Instagram:
www.instagram.com/diy3dtech/

Subscribe to the DIY3DTech YouTube Channel:
YouTube.DIY3DTech.com

Subscribe to the DIY3DTech OpenSCAD Channel:
openscad-youtube.diy3dtech.com

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: swag.DIY3DTech.com

FLIR ONE Thermal Imager for Android

by FLIR [FLIR]
Rank/Rating: 6669/-
Price: -

Wanhao i3 – 3D Printing a Rocket Fin Table!

Please visit www.DIY3DTech.com for more information on this and many other projects! As in this episode we will be printing a one piece rocket fin table on the Wanho i3 printer! You might remember simular project on the CNC made out of wood so I decided to give it a try in plastic and not that make it as one piece too! Take a look and see how it came out!

Want to print this yourself?

ThinkerCAD 3D Printed Rocket Fin Plant Stand!

Subscribe to the DIY3DTech YouTube Channel:
YouTube.DIY3DTech.com

3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc):
swag.DIY3DTech.com

Wanhao Duplicator I3 3D Printer – Switching to PEI as a Build Surface!

Please visit www.DIY3DTech.com for more information on this and many other projects! As in this episode we will be converting over to printing on PEI from the standard adhesive build sheets. However what is PEI you ask? Well PEI (Polyetherimide), also known as known as Ultem which is a reusable and “relatively maintenance free” build surface that can be used for both ABS (with a Heated Bed) and PLA (either warmed or cold) requiring no additional adhesives such as glue or tape. PEI is extra appealing due to its “no-surface-prep” conditions, which make it convenient to work with and printing on PEI typically requires no support rafts as parts adhere directly to the surface with no issue.

However it is suggested that after each print, wipe your PEI surface down with 70-91% Isopropyl alcohol, to ensure that you remove away any grease or other residues that may have accumulated on the surface which will help increase your surface adhesion greatly.

Gizmo Dorks PEI Sheet, 8″ x 8″ 3D Printer Build Surface 1mm thick Polyetherimide Ultem:
amzn.to/1porbov

Visit our site:
www.DIY3DTech.com

Subscribe to the DIY3DTech YouTube Channel:
YouTube.DIY3DTech.com

3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc):
swag.DIY3DTech.com

Wanhao Duplicator I3 3D Printer – 3D Calibration Ruler Test!

Please visit www.DIY3DTech.com for more information on this and many other projects! As in this episode we will be printing a 3D Calibration Ruler to test the accuracy of the X, Y and Z axis of the Wanhao so check it out and give it a try on your 3D printer. The Thingiverse link is below!

3D Calibration Ruler:
www.thingiverse.com/thing:25763

Subscribe to the DIY3DTech YouTube Channel:
YouTube.DIY3DTech.com

3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc):
swag.DIY3DTech.com

by - [-]
Rank/Rating: -/-
Price: -

3D Printed Project – Extruder Measurement Tool Part Two!

Please visit www.DIY3DTech.com for more information on this and many other projects! As in this episode we will be putting the extrusion measurement tool to work from the last episode. As we will actually measure the the flow of filament on the Wanhao and I will show where the adjustments are. So grab a coffee or other fine beverage and take a peek before heading off to your own maker space.
Subscribe to the DIY3DTech YouTube Channel:
YouTube.DIY3DTech.com

3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc):
swag.DIY3DTech.com

by - [-]
Rank/Rating: -/-
Price: -