In this episode, we will be at the first generation of air-assist which we designed for the Ortur Laser Master and other diode based lasers! However please note that plastic burns and use of this model is at your own risk! The model (three parts) will be out on Thingiverse (find it here: www.thingiverse.com/thing:4575561 ) and you will also need a short M3 bolt (see more here: amzn.to/2TDrspX ) along with a 9mm x 0.5 tap for the laser lens (see more here: amzn.to/3ld5CpA ) as the lens needs to be super straight. In addition you will also nee a length of silicone tubing (others will pull too hard) and you can get a length of it here: amzn.to/2Qd8xAh
Now I do recommend this for use with a G8 Lens which you can get here: diy3dtech.com/G8-Laser-Lens
Also for an air pump, we use a small inexpensive air brush compressor which you can find here: amzn.to/3iZ5nfU with the presure set to about 6PSI You will also need to source a new house and 1/4″ to hose barb adapter (see more here: amzn.to/3gjhiDo ).
Note: this will also likley work on other similar diode lasers…
Want to see what we are up to daily? Check out our regular YouTube Blog posts at: diy3dtech.com/blog
Please visit www.DIY3DTech.com for more information on this and many other projects!
Check us out on Social Media to see what we are up too as we always have something cooking in the shop!
-Follow us on Instagram:
-Follow us on Tumblr:
-Follow us on Reddit:
Subscribe to the DIY3DTech YouTube Channel:
Subscribe to the DIY3DTech OpenSCAD Channel:
If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: swag.DIY3DTech.com
Are you a retailer or product manufacture and would like your product reviewed? Please contact us at info[at]diy3dtech.com