In this episode, we will be we will be looking what you will need to cut thick ( Polyethylene – Fastcap Kaizen) foam with the Ortur Laster Master II (see more here: diy3dtech.com/ORTUR_Laser_Master ). The Ortur Laser Master II with its large size is great for making Kaizen tool cut outs using FastCap style foam (see more here: amzn.to/37EcY0V ). So if your a maker you need one of these to start organizing your shop today!
One of the important things to note is the G8 lens is a very important piece in making cuts to thicker materials because of its long focal length. It will produce a narrower kerf over a greater distance.
What you need for this project:
-Orthur Laster Master II: diy3dtech.com/ORTUR_Laser_Master
-G8 Laser Lens: diy3dtech.com/G8-Laser-Lens
-Air Assist: designstore.diy3dtech.com/ortur-air-assist-for-g8-lens-v1/
-Small Air Compressor: amzn.to/3iZ5nfU
-FastCap Foam: amzn.to/3kpFruK
Also be sure to check our Ortur Laser Resource Page: diy3dtech.com/ortur-laser-resource-page/
Our Preferred 450nm laser safety glasses: diy3dtech.com/Professional_Violet_Blue_Laser_Safety_Glasses
Must have G8 replacement lens: diy3dtech.com/G8-Laser-Lens
3D Printable Ortur Large Format Laser Upgrade Parts:
-Leg Retainers: www.thingiverse.com/thing:4487570
-Cable Management: www.thingiverse.com/thing:4488811
-Laser Focus Knob: www.thingiverse.com/thing:4487510
-Laser Air Assist: www.thingiverse.com/thing:4575561
-4 Inch Desktop Hood: amzn.to/3eETmcI
-4 Inch x 25 Foot Hose: amzn.to/2OyhXp1
-4 Inch Blast Gate: amzn.to/3eDxjDh
-4 Inch In-Line DC Fan: amzn.to/2CkUuFp
-4 Inch Adjustable Clamps: amzn.to/397sjWv
Preferred Control Software (LightBurn): lightburnsoftware.com/
Also if you want to learn more about laser safety, we have linked a PDF form Laser Vision which we recommend as well as their products too: diy3dtech.com/guide-to-laser-safety-glasses/
Want to see what we are up to daily? Check out our regular YouTube Blog posts at: diy3dtech.com/blog
Please visit www.DIY3DTech.com for more information on this and many other projects!
Check us out on Social Media to see what we are up too as we always have something cooking in the shop!
-Follow us on Instagram:
-Follow us on Tumblr:
-Follow us on Reddit:
Subscribe to the DIY3DTech YouTube Channel:
Subscribe to the DIY3DTech OpenSCAD Channel:
If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: swag.DIY3DTech.com
Are you a retailer or product manufacture and would like your product reviewed? Please contact us at info[at]diy3dtech.com